Oklahoma Administrative Code
Title 785 - Oklahoma Water Resources Board
Chapter 35 - Well Driller and Pump Installer Licensing
Subchapter 5 - General Requirements to Maintain Licenses and Operator Certifications
Section 785:35-5-2 - General requirements for certified operators
Universal Citation: OK Admin Code 785:35-5-2
Current through Vol. 42, No. 1, September 16, 2024
All certified operators shall be required to do the following to maintain their certification:
(1) Complete each well or install each pump to meet or exceed the minimum standards adopted by the Board in this Chapter.
(2) Provide accurate information for any reports or other documents filed with the Board.
(3) Properly renew said certification as required herein, including continuing education attendance.
(4) Have in his possession the operator certification any time he is in charge of drilling or pump installation operations.
Amended at 20 Ok Reg 2608, eff 7-11-03
Disclaimer: These regulations may not be the most recent version. Oklahoma may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
