Oklahoma Administrative Code
Title 765 - Oklahoma Used Motor Vehicle, Dismantler, and Manufactured Housing Commission
Chapter 13 - Temporary License Plates
Subchapter 3 - Design
Section 765:13-3-2 - Form and substance of the temporary license plate

Universal Citation: OK Admin Code 765:13-3-2

Current through Vol. 42, No. 1, September 16, 2024

(a) The temporary license plate for all used motor vehicles except motorcycles shall be 11 1/2 inches in length and 6 inches in height.

(b) A temporary license plate for a motorcycle shall be 7 inches in length and 4 inches in height.

(c) The temporary license plate shall be of a weatherproof non-glare plastic-impregnated white substance with ink absorbing characteristics capable of withstanding continual exposure to the natural elements such as water, mud and wind without loss of form or content for a period in excess of two (2) months.

(d) Fastener holes for placing the temporary license plate to the vehicle shall be at an appropriate location for use of the factory installed mounting holes on the vehicle on which the temporary license plate shall be placed.

Added at 25 Ok Reg 363, eff 11-1-07 (emergency); Added at 25 Ok Reg 2085, eff 6-26-08

Disclaimer: These regulations may not be the most recent version. Oklahoma may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.