Oklahoma Administrative Code
Title 748 - Oklahoma Uniform Building Code Commission
Chapter 20 - Adopted Codes
Subchapter 6 - IRC[®] 2018
Section 748:20-6-39 - IRC[®] 2018 Chapter 34 General Requirements (Electrical)

(1) Section E3403.3 Listing and labeling. This section has been modified to add a requirement to comply with the National Electrical Code® (NEC®), NFPA 70®. The section has been modified to read: E3403.3 Listing and labeling. Electrical materials, components, devices, fixtures and equipment shall be listed for the application, in accordance with NFPA 70®, shall bear the label of an approved agency and shall be installed, and used, or both, in accordance with the manufacturer's installation instructions [110.3(B)].

(2) Section 3404.7 Integrity of Electrical Equipment. This section has been modified to allow for the reuse of existing electrical equipment, rather than requiring new replacements when certain conditions are met. This section has been modified to read: E3404.7 Integrity of electrical equipment. Internal parts of electrical equipment, including busbars, wiring terminals, insulators and other surfaces, shall not be damaged or contaminated by foreign materials such as paint, plaster, cleaners or abrasives, and corrosive residues. There shall not be any damaged parts that might adversely affect safe operation or mechanical strength of the equipment such as parts that are broken; bent; cut; deteriorated by corrosion, chemical action, or overheating. Foreign debris shall be removed from equipment. Damaged materials, equipment, appliances, and devices shall not be reused unless such elements have been reconditioned, tested, and placed in good and proper working condition and approved by a Nationally Recognized Testing Laboratory (NRTL), or by the manufacturer of the equipment. Electrical equipment damaged by natural or man-made events shall be reused only as recommended by the manufacturer of such equipment. [110.12(B)]