Oklahoma Administrative Code
Title 460 - Department of Mines
Chapter 30 - Coal Combustion By-Product Placement Rules and Regulations
Subchapter 3 - CCB Placement Applications
Section 460:30-3-7 - CCB placement: Analysis
Universal Citation: OK Admin Code 460:30-3-7
Current through Vol. 41, No. 13, March 15, 2024
Each application shall contain a complete analysis of the CCB to be placed in the mining permit area. An additional analysis of CCB placed in the mining permit area will be submitted to the Department biennially and annually. Specific parameters to be analyzed initially, biennially and annually thereafter shall be:
(1) Ash testing parameters: initial, biennially, annually and if the source ash changes.
(A) T.C.L.P. analysis (Conducted biennially
and if the source of ash changes)
(i)
Arsenic
(ii) Barium
(iii) Cadmium
(iv) Chromium (total)
(v) Lead
(vi) Selenium
(B) Chemical analysis of pH (Conducted
annually and if the source of ash changes)
(2) CKD testing parameters: initial, biennially, annually and if manufacturing/production processes that effect CKD change;
(A) T.C.L.P. analysis (Conducted
biennially and if manufacturing/production processes that effect CKD change.
(i) Antimony
(ii) Arsenic
(iii) Barium
(iv) Beryllium
(v) Cadmium
(vi) Chromium (total)
(vii) Lead
(viii) Mercury
(ix) Nickel
(x) Silver
(xi) Selenium
(xii) Thallium
(B) Chemical analysis of pH (Conducted
annually and if manufacturing/production processes that effect CKD
change.)
Added at 20 Ok Reg 2819, eff 8-26-03; Amended at 21 Ok Reg 2993, eff 7-26-04
Disclaimer: These regulations may not be the most recent version. Oklahoma may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
