Oklahoma Administrative Code
Title 460 - Department of Mines
Chapter 20 - The Permanent Regulations Governing the Coal Reclamation Act of 1979
Subchapter 43 - Permanent Program Performance Standards: Surface Mining Standards
Section 460:20-43-4 - Casing and sealing of drilled holes: general requirements

Universal Citation: OK Admin Code 460:20-43-4
Current through Vol. 42, No. 1, September 16, 2024

Each exploration hole, other drill or borehole, well, or other exposed underground opening shall be cased, sealed, or otherwise managed, as approved by the Department, to prevent acid or other toxic drainage from entering ground or surface waters, to minimize disturbance to the prevailing hydrologic balance, and to ensure the safety of people, livestock, fish and wildlife, and machinery in the permit area and adjacent area. If these openings are uncovered or exposed by surface mining activities within the permit area they shall be permanently closed, unless approved for water monitoring, or otherwise managed in a manner approved by the Department. Use of a drilled hole or bore hole or monitoring well as a water well must meet the provisions of Section 460:20-43-8. This Subchapter does not apply to holes solely drilled and used for blasting.

Disclaimer: These regulations may not be the most recent version. Oklahoma may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.