Oklahoma Administrative Code
Title 40 - Board of Tests for Alcohol and Drug Influence
Chapter 50 - Ignition Interlock
Subchapter 1 - Ignition Interlock Devices, Service Centers, Technicians
Section 40:50-1-6.1 - Removal requirements
Current through Vol. 42, No. 1, September 16, 2024
The device shall be removed according to the following guidelines:
(1) The only person(s) allowed to remove or observe the removal of the device are ignition interlock technicians licensed by the Board.
(2) A designated waiting area that is separate from the removal area is to be provided for the participant.
(3) Removal shall consist of removal of the device, harness, relay and all third-party materials used to initially install the device, thereby returning the vehicle and its wiring to normal manufacturer operation.
(4) Adequate security measures shall be taken to ensure that unauthorized personnel cannot gain access to proprietary materials or files of other participants.
(5) All data contained in the data storage system shall be retrieved in conjunction with removal of the device. Records may be maintained electronically.
(6) Upon completion of the removal of the device, harness, relay and all third-party materials used to initially install the device, the licensed ignition interlock technician shall:
(7) Outside the State of Oklahoma, the technician or service center appropriately authorized pursuant to their jurisdictional authority, shall upon completion of the removal of the device, harness, relay and all third-party materials used to initially install the device:
Added at 27 Ok Reg 2667, eff 8-26-10
