Oklahoma Administrative Code
Title 40 - Board of Tests for Alcohol and Drug Influence
Chapter 50 - Ignition Interlock
Subchapter 1 - Ignition Interlock Devices, Service Centers, Technicians
Section 40:50-1-4.1 - Installation requirements
Current through Vol. 41, No. 13, March 15, 2024
The device shall be installed according to the following guidelines:
(1) Initial device installations shall only be performed in a service center duly licensed by the Board.
(2) The only person(s) allowed to install or observe the installation of the device are ignition interlock technicians duly licensed by the Board or manufacturer training representatives conducting installation trainings who are conditionally authorized by the Board.
(3) A designated waiting area that is separate from the installation area is to be provided for the participant.
(4) Adequate security measures shall be taken to ensure that unauthorized personnel cannot gain access to proprietary materials or files of other participants.
(5) Installations shall be completed on operable vehicles, as defined in this title.
(6) The ignition interlock technician shall perform maintenance and calibration on the device in accordance with this title.
(7) Upon completion of an installation of a device and all the components required for the device to function as required by these rules, the licensed ignition interlock technician shall provide the participant with installation verification in the form and/or format designated by the Board.
(8) Upon completion of the installation of a device required for compliance with an Installation Authority(s), the licensed ignition interlock technician shall:
(9) Outside the State of Oklahoma, upon completion of the installation of a device required for compliance with an Installation Authority(s), the technician or service center appropriately authorized pursuant to their jurisdictional authority, shall:
Added at 27 Ok Reg 2667, eff 8-26-10
