Oklahoma Administrative Code
Title 40 - Board of Tests for Alcohol and Drug Influence
Chapter 50 - Ignition Interlock
Subchapter 1 - Ignition Interlock Devices, Service Centers, Technicians
Section 40:50-1-3.2 - Reporting requirements

Universal Citation: OK Admin Code 40:50-1-3.2

Current through Vol. 42, No. 1, September 16, 2024

(a) Reportable violations are as follows:

(1) Three (3) positive result startup tests within a fifteen (15) minute time frame.

(2) A circumvention.

(3) A retest violation.

(4) Tampering.

(5) Permanent lockout.

(b) If required by the Installation Authority and/or Monitor, reportable violations shall be reported in the form and/or format designated by the Installation Authority and/or Monitor, within five business days, banking holidays excepted, after a maintenance and calibration service, violation reset service or removal of the device.

(c) The manufacturer shall ensure proper record maintenance.

(d) The manufacturer shall report to the Board, in the form and format designated by the Board:

(1) Device installations.

(2) Device removals.

(3) Any violation reset.

Maintenance and calibration performed on an ignition interlock device as required by these rules.

Added at 27 Ok Reg 2667, eff 8-26-10

Disclaimer: These regulations may not be the most recent version. Oklahoma may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.