Oklahoma Administrative Code
Title 40 - Board of Tests for Alcohol and Drug Influence
Chapter 50 - Ignition Interlock
Subchapter 1 - Ignition Interlock Devices, Service Centers, Technicians
Section 40:50-1-3.2 - Reporting requirements
Universal Citation: OK Admin Code 40:50-1-3.2
Current through Vol. 42, No. 1, September 16, 2024
(a) Reportable violations are as follows:
(1) Three (3)
penalty fails, at startup, within a fifteen (15) minute time frame.
(2) A circumvention.
(3) Three (3) retest violations constitute a
reportable violation. Each retest violation thereafter constitutes a reportable
violation.
(4) Removal of the
device.
(5) Tampering.
(6) Permanent lockout.
(b) Reportable violations shall be reported to the Installation Authority and/or Monitor, in the form and/or format designated by the Board, within five business days, banking holidays excepted, after a maintenance and calibration service, violation reset service or removal of the device.
(c) The manufacturer shall ensure proper record maintenance.
(d) The manufacturer shall report to the Board, in the form and format designated by the Board:
(1) Device installations.
(2) Device removals.
(3) Any reportable violations.
(4) Maintenance and calibration performed on
an ignition interlock device as required by these rules.
Added at 27 Ok Reg 2667, eff 8-26-10
Disclaimer: These regulations may not be the most recent version. Oklahoma may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
