Oklahoma Administrative Code
Title 40 - Board of Tests for Alcohol and Drug Influence
Chapter 50 - Ignition Interlock
Subchapter 1 - Ignition Interlock Devices, Service Centers, Technicians
Section 40:50-1-3.1 - Violation reset

Universal Citation: OK Admin Code 40:50-1-3.1

Current through Vol. 42, No. 1, September 16, 2024

(a) A violation reset shall be activated by any of the following:

(1) Three (3) positive result startup tests within a fifteen (15) minute time frame.

(2) A circumvention.

(3) A retest violation.

(4) A power violation, once power is restored to the device.

(b) When a violation reset is activated, the device will initiate a unique audible and/or visual cue that will warn the driver that the device will enter a permanent lockout in five (5) days. This event will be uniquely recorded in the data storage system and will simultaneously start a countdown that culminates in the permanent lockout. A licensed ignition interlock technician shall remedy a permanent lockout in personunless the manufacturer has been approved for temporary lockout override issuance pursuant to O.A.C 40:50-1-3.3.

(c) Anytime a device is submitted pursuant to a violation reset the licensed ignition interlock technician shall perform a violation reset service consisting of, but not limited to:

(1) Performing maintenance and calibration in accordance with this title, and

(2) Retrieving all data contained in the data storage system. Proper record maintenance shall be ensured as required in this title.

Added at 27 Ok Reg 2667, eff 8-26-10

Disclaimer: These regulations may not be the most recent version. Oklahoma may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.