Oklahoma Administrative Code
Title 40 - Board of Tests for Alcohol and Drug Influence
Chapter 50 - Ignition Interlock
Subchapter 1 - Ignition Interlock Devices, Service Centers, Technicians
Section 40:50-1-2.4 - Modification of a certified device
Universal Citation: OK Admin Code 40:50-1-2.4
Current through Vol. 42, No. 1, September 16, 2024
(a) A manufacturer representative shall notify the Board at least 15 days before implementation of any modification, upgrade or alteration to any hardware, software or firmware of a device certified for use in this state. Said notification shall include:
(1) A description
and explanation of the modification, upgrade or alteration and satisfactory
proof that these modifications, upgrades or alterations do not adversely affect
the ability of the device to satisfy the requirements of this title,
and
(2) A comprehensive plan of
action for the phasing out of the use of the current device. This plan of
action must be approved by the Board prior to the implementation of the plan of
action.
(b) Any equipment in the possession of the Board that was retained pursuant to certification of the device shall be modified, upgraded or altered simultaneously with implementation.
(c) Material modifications to a certified device, as determined by the Board, may require certification pursuant to this title.
Added at 27 Ok Reg 2667, eff 8-26-10
Disclaimer: These regulations may not be the most recent version. Oklahoma may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
