Oklahoma Administrative Code
Title 380 - Department of Labor
Chapter 25 - Boiler and Pressure Vessel Rules
Subchapter 3 - Administration
Section 380:25-3-26 - Requirements for new installations
Universal Citation: OK Admin Code 380:25-3-26
Current through Vol. 41, No. 13, March 15, 2024
Except for State of Oklahoma authorized owner/user Inspection Agencies, the installer must notify the Bureau of Boiler Inspection prior to installation. No boiler or pressure vessel shall hereafter be installed in this State unless it has been constructed in conformity with the ASME Code and installed in conformity with the requirements of this Chapter except:
(1) Those exempt by the Act;
(2) Those outlined by the rules of this Chapter; and
(3) Those hot water supply heaters constructed to a national standard.
Disclaimer: These regulations may not be the most recent version. Oklahoma may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
