Current through Vol. 42, No. 1, September 16, 2024
(a) Post construction termiticide treatments
with sampling performed within 180 days of treatment shall disclose residue
threshold levels established in the vertical barrier for termiticides based on
values obtained from research conducted at the U.S. Forest Research Center,
Gulfport, Mississippi; Kard et al. 1989; Kard 1991, 1992, 1994, The Bayer
Company, Agricultural Division, and the Board may establish interim residue
levels for termiticide products for which no lowest expected threshold value
exists utilizing input from Oklahoma State University, manufacturers, or
industry until a value has been established.
(1) Torpedo and other 25.6 % Permethrin
products shall have a residue threshold level of 63 ppm.
(2) Tribute and other 24.5 % Esfenvalerate
products shall have a residue threshold level of 150 ppm.
(3) Prevail FT and other 24.8% Cypermethrin
products shall have a residue threshold level of 46 ppm.
(4) Demon TC and other 25.3% Cypermethrin
products shall have a residue threshold level of 28 ppm.
(5) Dragnet FT and other 36.8% Permethrin
products shall have a residue threshold level of 85 ppm.
(6) Premise and other Imidacloprid products
shall have a residue threshold level of 10 ppm.
(7) Termidor WG, Termidor SC and other
Fipronil products shall have a residue threshold level of 12 ppm.
(8) Cypermethrin G-Pro, EPA Reg. No. 79676-1,
and other 24.8% Cypermethrin products shall have a residue threshold level of
46 ppm.
(9) Permethrin TC, EPA Reg.
No. 51036-287, Permethrin Pro, EPA Reg. No. 1021-1836, and other 36.8%
Permethrin products shall have a residue threshold level of 85 ppm.
(10) Demon Max Insecticide, EPA Reg. No.
100-1218, and other 25.3% Cypermethrin products shall have a residue threshold
level of 28 ppm.
(11) Talstar One
Multi-Insecticide, EPA Reg. No. 279-3206, and other 7.9% Bifenthrin products
shall have a residue threshold level of 11 ppm.
(12) Biflex SFR Termiticide/Insecticide, EPA
Reg. No. 279-3177, and other 23.4% Bifenthrin products shall have a residue
threshold level of 11 ppm.
(b) Pre-construction termiticide treatments
(pre-treats) with sampling performed within 30 days or 180 days of treatment
shall disclose residue threshold levels established in the vertical barrier for
termiticides based on values obtained from research conducted at the U.S.
Forest Research Center, Gulfport, Mississippi; Kard et al. 1989; Kard 1991,
1992, 1994, The Bayer Company, Agricultural Division, and the Board may
establish interim residue levels for termiticide products for which no lowest
expected threshold value exists utilizing input from Oklahoma State University,
manufacturers, or industry until a value has been established.
(1) Torpedo and other 25.6 % Permethrin
products:
(A) Shall have a residue threshold
level within 30 days of treatment of 90 ppm.
(B) Shall have a residue threshold level
after 30 days and within 180 days of treatment of 63 ppm.
(2) Tribute and other 24.5 % Esfenvalerate
products:
(A) Shall have a residue threshold
level within 30 days of treatment of 204 ppm.
(B) Shall have a residue threshold level
after 30 days and within 180 days of treatment of 150 ppm.
(3) Prevail FT and other 24.8% Cypermethrin
products:
(A) Shall have a residue threshold
level within 30 days of treatment of 64 ppm.
(B) Shall have a residue threshold level
after 30 days and within 180 days of treatment of 46 ppm.
(4) Demon TC and other 25.3% Cypermethrin
products:
(A) Shall have a residue threshold
level within 30 days of treatment of 41 ppm.
(B) Shall have a residue threshold level
after 30 days and within 180 days of treatment of 28 ppm.
(5) Dragnet FT and other 36.8% Permethrin
products:
(A) Shall have a residue threshold
level within 30 days of treatment of 97 ppm.
(B) Shall have a residue threshold level
after 30 days and within 180 days of treatment of 85 ppm.
(6) Premise and other Imidacloprid products:
(A) Shall have a residue threshold level
within 30 days of treatment of 10 ppm.
(B) Shall have a residue threshold level
after 30 days and within 180 days of treatment of 10 ppm.
(7) Termidor WG, Termidor SC and other
Fipronil products:
(A) Shall have a residue
threshold level within 30 days of treatment of 12 ppm.
(B) Shall have a residue threshold level
after 30 days and within 180 days of treatment of 12 ppm.
(8) Cypermethrin G-Pro, EPA Reg. No. 79676-1,
and other 24.8% Cypermethrin products:
(A)
Shall have a residue threshold level within thirty (30) days of treatment of 64
ppm.
(B) Shall have a residue
threshold level after thirty (30) days and within one hundred eighty (180) days
of treatment of 46 ppm.
(9) Permethrin TC, EPA Reg. No. 51036-287,
Permethrin Pro, EPA Reg. No. 1021-1836, and other 36.8% Permethrin products:
(A) Shall have a residue threshold level
within thirty (30) days of treatment of 97 ppm.
(B) Shall have a residue threshold level
after thirty (30) days and within one hundred eighty (180) days of treatment of
85 ppm.
(10) Demon Max
Insecticide, EPA Reg. No. 100-1218, and other 25.3% Cypermethrin products:
(A) Shall have a residue threshold level
within thirty (30) days of treatment of 41 ppm.
(B) Shall have a residue threshold level
after thirty (30) days and within one hundred eighty (180) days of treatment of
28 ppm.
(11) TalstarOne
Multi-Insecticide, EPA Reg. No. 279-3206, and other 7.9% Bifenthrin products:
(A) Shall have a residue threshold level
within thirty (30) days of treatment of 11 ppm.
(B) Shall have a residue threshold level
after thirty (30) days and within one hundred eighty (180) days of treatment of
11 ppm.
(12) Biflex SFR
Termiticide/Insecticide, EPA Reg. No. 279-3177, and other 23.4% Bifenthrin
products:
(A) Shall have a residue threshold
level within thirty (30) days of treatment of 11 ppm.
(B) Shall have a residue threshold level
after thirty (30) days and within one hundred eighty (180) days of treatment of
11 ppm.
(c)
Pre-construction termiticide treatments (pre-treats) with sampling performed
within 30 days or 180 days of treatment shall disclose residue threshold levels
established in the horizontal barriers for termiticides based on values
obtained from research conducted at the U.S. Forest Research Center, Gulfport,
Mississippi; Kard et al. 1989; Kard 1991, 1992, 1994, The Bayer Company,
Agricultural Division, and the Board may establish interim residue levels for
termiticide products for which no lowest expected threshold value exists
utilizing input from Oklahoma State University, manufacturers, or industry
until a value has been established.
(1)
Torpedo and other 25.6 % Permethrin products:
(A) Shall have a residue threshold level
within 30 days of treatment of 68 ppm.
(B) Shall have a residue threshold level
after 30 days and within 180 days of treatment of 47 ppm.
(2) Tribute and other 24.5 % Esfenvalerate
products:
(A) Shall have a residue threshold
level within 30 days of treatment of 153 ppm.
(B) Shall have a residue threshold level
after 30 days and within 180 days of treatment of 113 ppm.
(3) Prevail FT and other 24.8% Cypermethrin
products:
(A) Shall have a residue threshold
level within 30 days of treatment of 48 ppm.
(B) Shall have a residue threshold level
after 30 days and within 180 days of treatment of 35 ppm.
(4) Demon TC and other 25.3% Cypermethrin
products:
(A) Shall have a residue threshold
level within 30 days of treatment of 31 ppm.
(B) Shall have a residue threshold level
after 30 days and within 180 days of treatment of 21 ppm.
(5) Dragnet FT and other 36.8% Permethrin
products:
(A) Shall have a residue threshold
level within 30 days of treatment of 73 ppm.
(B) Shall have a residue threshold level
after 30 days and within 180 days of treatment of 64 ppm.
(6) Premise and other Imidacloprid products:
(A) Shall have a residue threshold level
within 30 days of treatment of 5 ppm.
(B) Shall have a residue threshold level
after 30 days and within 180 days of treatment of 5 ppm.
(7) Termidor WG, Termidor SC and other
Fipronil products:
(A) Shall have a residue
threshold level within 30 days of treatment of 9 ppm.
(B) Shall have a residue threshold level
after 30 days and within 180 days of treatment of 9 ppm.
(8) Cypermethrin G-Pro, EPA Reg. No. 79676-1,
and other 24.8% Cypermethrin products:
(A)
Shall have a residue threshold level within thirty (30) days of treatment of 48
ppm.
(B) Shall have a residue
threshold level after thirty (30) days and within one hundred eighty (180) days
of treatment of 35 ppm.
(9) Permethrin TC, EPA Reg. No. 51036-287,
and Permethrin Pro, EPA Reg. No. 1021-1836, and other 36.8% Permethrin
products:
(A) Shall have a residue threshold
level within thirty (30) days of treatment of 73 ppm.
(B) Shall have a residue threshold level
after thirty (30) days and within one hundred eighty (180) days of treatment of
64 ppm.
(10) Demon Max
Insecticide, EPA Reg. No. 100-1218, and other 25.3% Cypermethrin products:
(A) Shall have a residue threshold level
within thirty (30) days of treatment of 31 ppm.
(B) Shall have a residue threshold level
after thirty (30) days and within one hundred eighty (180) days of treatment of
21 ppm.
(11) TalstarOne
Multi-Insecticide, EPA Reg. No. 279-3206, and other 7.9% Bifenthrin products:
(A) Shall have a residue threshold level
within thirty (30) days of treatment of 11 ppm.
(B) Shall have a residue threshold level
after thirty (30) days and within one hundred eighty (180) days of treatment of
11 ppm.
(12) Biflex SFR
Termiticide/Insecticide, EPA Reg. No. 279-3177, and other 23.4% Bifenthrin
products:
(A) Shall have a residue threshold
level within thirty (30) days of treatment of 11 ppm.
(B) Shall have a residue threshold level
after thirty (30) days and within one hundred eighty (180) days of treatment of
11 ppm.
(d)
Any distributor product, as defined by
40 C.F.R. §
152.132, or any product with an alternate
brand name and identical registration number shall be subject to the residue
threshold levels for the related primary registration or brand name contained
in this section.
(e) Any product
not listed in this section shall have the residue threshold levels as
established either through independent research projects accepted by the
Department or through accepted documentation provided to the Department by the
manufacturer.
(1) Any residue threshold levels
established pursuant to this subsection shall be communicated to the public
through the Department's website.
(2) The Department shall maintain a list of
all records, studies, and correspondence utilized to establish residue
threshold levels pursuant to this subsection.
Added at 17 Ok Reg
1018, eff 5-11-00; Amended at 17 Ok Reg 3567, eff 9-7-00 (emergency); Amended
at 18 Ok Reg 1444, eff 5-25-01; Amended at 23 Ok Reg 2168, eff
6-25-06
