Current through Vol. 41, No. 13, March 15, 2024
(a)
The White Tag shall be the
permanent visual record of the original installation and certification. The
following additional requirements shall apply to the use of the WhiteTag.
(1) The tag must be permanently affixed to
the system as long as the system is in service.
(2) The tag shall be five inches (5") in
height by four inches (4") in width and shall be water durable and have a
self-adhesive backing.
(3) The tag
shall bear the following information:
(A) "DO
NOT REMOVE BY ORDER OF THE FIRE CODE OFFICIAL";
(B) The certifying company's name, address,
and telephone number (local office);
(C) The certifying company's pre-engineered
system company license number;
(D)
The signature, printed name and the license number of the pre-engineered system
technician certifying the system;
(E) The pre-engineered system permit
number;
(F) The make and model of
the pre-engineered system;
(G) The
date of certification; and,
(H) The
Code, Edition and year under which the system was installed.
(4) Only the Fire Code Official
may remove an installation tag.
(b)
Traffic Light Bright Green Tag
(Semi-annual inspection tag/sticker). The Green Tag shall be the visual
record of the last semi-annual inspection or initial certification testing
where the pre-engineered system was found to be operable with no impairments.
The following additional requirements shall apply to the use of the Green Tag:
(1) The semi-annual inspection must be
conducted in accordance with NFPA testing standards and the manufacturer's
specifications.
(2) The tag shall
be five and one fourth inches (5 1/4") in height and two and five-eights inches
(2-5/8") in width.
(3) The tag
shall bear the following information:
(A) "DO
NOT REMOVE BY ORDER OF THE FIRE CODE OFFICIAL;"
(B) The service company's name, address, and
telephone number (local office);
(C) The service company's pre-engineered
system company license number.
(D)
The signature, printed name and license number of the pre-engineered system
technician certifying the system;
(E) The month and year the inspection was
performed; and
(F) The type of
pre-engineered system that was serviced.
(4) Only a Pre-engineered System technician,
employed by a Pre-engineered System Company or the Fire Code Official may
remove the tag.
(c)
Traffic Light Bright Yellow Tag (Semi-Annual inspection tag/sticker)
Operational Pre-engineered System but with minor impairments. The intent
of the Yellow Tag is to provide notification to the authority having
juris-diction of a system that is operable with impairments that do not
severely compromise the system's functional operation. The Yellow Tag shall be
the visual record of the last semi-annual inspection where the system was found
to be operable but with minor impairments. The following additional
requirements shall apply to the use of the Yellow Tag:
(1) The semi-annual inspection must be
conducted in accordance with NFPA testing standards and manufacturer's
specifications.
(2) The tag shall
be five and one fourth inches (5 1/4") in height and two and five-eights inches
(2 5/8") in width.
(3) The tag
shall bear the following information:
(A) "DO
NOT REMOVE BY ORDER OF THE FIRE CODE OFFICIAL;"
(B) The service company's name, address, and
telephone number (local office);
(C) The service company's pre-engineered
system company license number.
(D)
The signature, printed name and license number of the pre-engineered system
technician certifying the system;
(E) The month and year the inspection was
performed;
(F) The type of
pre-engineered system that was serviced; and
(G) A list of the impairments.
(4) Only a Pre-engineered System
technician, employed by a Pre-engineered System Company or the Fire Code
Official may remove the tag.
(5) If
a Yellow Tag is placed on a pre-engineered system the Pre-engineered System
Company shall notify the building owner or agent and the Fire Code Official, in
writing of all impairments immediately or as soon as practicable, but no later
than seventy-two (72) hours.
(d)
Traffic Light Bright Red Tag
(Semi-Annual inspection tag/sticker) Pre-engineered System Inoperable.
The intent of the Red Tag is to provide notification to the authority having
jurisdiction of a pre-engineered system that is inoperable.
(1) The semi-annual inspection must be
conducted in accordance with NFPA testing standards and the manufacturer's
specifications.
(2) The tag shall
be five and one fourth inches (5 -1/4") in height and two and five-eights
inches (2 5/8") in width.
(3) The
tag shall bear the following information:
(A)
"DO NOT REMOVE BY ORDER OF THE FIRE CODE OFFICIAL;"
(B) The service company's name, address, and
telephone number (local office);
(C) The service company's pre-engineered
system company license number.
(D)
The signature, printed name and license number of the pre-engineered system
technician certifying the system;
(E) The month and year the inspection was
performed;
(F) The type of
pre-engineered system that was serviced.
(G) A list of the deficiencies that render
the pre-engineered system inoperable
(4) Only a Pre-engineered System technician,
employed by a Pre-engineered System Company or the Fire Code Official may
remove the tag.
(5) If a Red Tag is
placed on a pre-engineered system the Pre-engineered System Company shall
notify the building owner or agent and the Fire Code Official in writing of all
impairments immediately or as soon as practicable, but no later than
twenty-four (24) hours.
Added at 25 Ok Reg 2427,
eff 7-11-08
