Oklahoma Administrative Code
Title 310 - Oklahoma State Department of Health
Chapter 257 - Food Establishments
Subchapter 7 - Equipment, Utensils and Linens
Section 310:257-7-43 - Warewashing machines, flow pressure device

Universal Citation: OK Admin Code 310:257-7-43

Current through Vol. 42, No. 1, September 16, 2024

(a) Warewashing machines that provide a fresh hot water sanitizing rinse shall be equipped with a pressure gauge or similar device such as a transducer that measures and displays the water pressure in the supply line immediately before entering the warewashing machine; and

(b) If the flow pressure measuring device is upstream of the fresh hot water sanitizing rinse control valve, the device shall be mounted in a 6.4 millimeter or one-fourth inch Iron Pipe Size (IPS) valve.

(c) Paragraphs(a) and (b) of this Section do not apply to a machine that uses only a pumped or recirculated sanitizing rinse.

Added at 23 Ok Reg 2358, eff 6-25-06; Amended at 26 Ok Reg 1477, eff 6-11-09

Disclaimer: These regulations may not be the most recent version. Oklahoma may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.