Oklahoma Administrative Code
Title 310 - Oklahoma State Department of Health
Chapter 233 - Body Piercing and Tattooing
Subchapter 7 - Requirements for Premises
Section 310:233-7-2.1 - Procedure areas
Universal Citation: OK Admin Code 310:233-7-2.1
Current through Vol. 42, No. 1, September 16, 2024
(a) Multiple procedure areas shall be separated from each other by a wall or rigid divider to visually define the space and limit potential contamination of neighboring procedure areas.
(b) Each procedure area shall:
(1) Have a minimum of forty-five
(45) square feet of floor space;
(2) Have a sharps container
available;
(3) Be equipped with a
handwashing facility with:
(A) Hot and cold
running water, under pressure;
(B)
Wrist or foot operated controls;
(C) Liquid germicidal soap;
(D) Disposable paper towels; and
(E) A covered waste
receptacle.
(c) All procedure area surfaces, including client chairs and benches shall be cleaned and disinfected after each client.
(d) Artificial light equivalent to at least one hundred (100) foot candles of intensity shall be provided.
Disclaimer: These regulations may not be the most recent version. Oklahoma may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
