Oklahoma Administrative Code
Title 25 - Oklahoma Department of Aerospace and Aeronautics
Chapter 35 - Anemometer Tower Regulations
Subchapter 1 - General Provisions
Section 25:35-1-2 - Definitions

Universal Citation: OK Admin Code 25:35-1-2
Current through Vol. 42, No. 1, September 16, 2024

The following words and terms, when used in this chapter, shall have the following meaning, unless the context clearly indicates otherwise:

"Anemometer" is an instrument for measuring and recording wind speed;

"Anemometer tower" is a structure, including all guy wires and accessory facilities, on which an anemometer is mounted, that is fifty (50) feet in height above the ground or higher, is not located within the boundaries of a municipality, and whose appearance is not otherwise regulated by state or federal law; and

"Commission" means the seven members of the Oklahoma Aerospace and Aeronautics Commission as appointed by the governor.

"Department" means the Oklahoma Department of Aerospace and Aeronautics, the state agency responsible for the administration and enforcement of the anemometer tower regulations.

Disclaimer: These regulations may not be the most recent version. Oklahoma may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.