Oklahoma Administrative Code
Title 245 - State Board of Licensure for Professional Engineers and Land Surveyors
Chapter 15 - Licensure and Practice of Professional Engineers and Land Surveyors
Subchapter 9 - Rules of Professional Conduct
Section 245:15-9-4 - Areas of practice
Current through Vol. 42, No. 1, September 16, 2024
(a) Licensees shall practice only in the areas of their competence and shall undertake assignments only when qualified by education, examination, or experience in the specific technical fields of engineering or land surveying involved. The records of the Board shall indicate a discipline(s) of engineering designated by the license holder and considered by the Board to be their area(s) of competence. All requests relating to listings for area(s) of competency require the review of the Board or its designee and shall include the following:
(b) Licensees shall not affix their signatures, date of signature, or seals to any plans or documents dealing with subject matter in which they lack competence, or areas of competence designated in the official Board records, nor to any plan or document not prepared under their direct control and personal supervision.
(c) Licensees may accept assignments for coordination of an entire project, provided that each design segment is signed, dated, and sealed by a licensee competent to practice in the discipline(s) of engineering and in direct control and personal supervision of that design segment.
(d) In the event a question arises as to the competence of a licensee in a specific technical field which cannot be otherwise resolved to the Board's satisfaction, the Board, either upon request of the licensee or on its own volition, shall admit the licensee to an appropriate examination.
Added at 10 Ok Reg 2211, eff 6-11-93; Amended at 18 Ok Reg 3023, eff 7-12-01; Amended at 20 Ok Reg 1568, eff 7-11-03; Amended at 23 Ok Reg 896, eff 5-11-06; Amended at 26 Ok Reg 1035, eff 5-11-09