Oklahoma Administrative Code
Title 158 - Construction Industries Board
Chapter 30 - Plumbing Industry Regulations
Subchapter 1 - General Provisions
Section 158:30-1-4 - Standard of installation
Universal Citation: OK Admin Code 158:30-1-4
Current through Vol. 42, No. 1, September 16, 2024
The standards of installation are the provisions of the plumbing codes - the International Plumbing Code, the International Fuel Gas Code and the plumbing portion of the International Residential Code, as revised and adopted by the OUBCC pursuant to the Oklahoma Uniform Building Code Commission Act.
Added at 19 Ok Reg 721, eff 1-22-02 (emergency); Added at 19 Ok Reg 1264, eff 5-28-02 ; Amended at 21 Ok Reg 491, eff 11-14-03 (emergency); Amended at 21 Ok Reg 1187, eff 5-27-04 ; Amended at 23 Ok Reg 1213, eff 5-25-06 ; Amended at 26 Ok Reg 2451, eff 7-11-09 ; Amended at 30 Ok Reg 1533, eff 7-11-13
Disclaimer: These regulations may not be the most recent version. Oklahoma may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
