Ohio Administrative Code
Title 5160 - Ohio Department of Medicaid
Chapter 5160-10 - Medical Supplies, Durable Medical Equipment, Orthoses, and Prosthesis Providers
Section 5160-10-18 - DMEPOS: hospital beds, bed accessories, and pressure-reducing support surfaces
Universal Citation: OH Admin Code 5160-10-18
Current through all regulations passed and filed through September 16, 2024
(A) Definitions and explanations.
(1) "Group 1," "group 2," and "group 3" are
classes of pressure-reducing support surface.
(a) Group 1 surfaces are generally
non-powered pads or overlays that are designed to be placed on top of a
hospital bed or standard mattress. They achieve their effect through the
application of, for example, a gel layer, air pressure, natural lamb's wool, or
synthetic sheepskin. Group 1 may also include some powered systems (alternating
pressure or low air loss) that are not classified as group 2.
(b) Group 2 surfaces generally encompass
powered air flotation beds, powered air mattresses, and non-powered advanced
overlays that are designed to be placed on top of a hospital bed frame or
standard bed frame.
(c) Group 3
surfaces are generally air-fluidized beds, which simulate the characteristics
of fluid by circulating air through a medium such as silicone-coated ceramic
beads. They are used for the treatment of stage III or stage IV pressure
sores.
(2) "Stage I,"
"stage II," "stage III," and "stage IV" are classes of tissue breakdown
associated with pressure sores.
(a) Stage I is
characterized by erythema (redness lasting at least fifteen minutes after
pressure is removed), warmth, tenderness, and sometimes blistering. The
affected area is usually located over a bony prominence. Further breakdown may
be occurring if erythema fails to dissipate when pressure is removed; however,
stage I is usually considered a transient circulatory disturbance, and the
affected area generally returns to normal within twenty-four hours.
(b) Stage II involves actual tissue damage
and appears as a shallow, open ulcer with a red or pink wound bed without
slough or as an intact or ruptured serum-filled blister. It is characterized by
a distinct break in epidermal integrity (which may extend into the dermis),
erythema, disturbance in skin temperature, tenderness, local swelling or edema,
and sometimes drainage. (This stage should not be confused with skin tears,
tape burns, perineal dermatitis, maceration, or excoriation.) Stage II tissue
damage generally heals quickly and easily.
(c) Stage III is characterized by epidermal
and dermal destruction that penetrates subcutaneous tissue, infection,
cellulitis, eschar, pain, and drainage. Subcutaneous fat may be visible;
however, bone, tendon, and muscle are not exposed. Slough may be present but
does not obscure the depth of tissue loss. There may be undermining and
tunneling of surrounding subcutaneous tissue. With proper attention under
optimal conditions, a stage III wound can heal in two to four weeks.
(d) Stage IV is characterized by destruction
of the epidermis and dermis, penetration of the deep subcutaneous layers,
exposure of subcutaneous structures, destruction of muscle or bone, and
possible undermining of surrounding subcutaneous tissue. Slough or eschar may
be present.
(B) Coverage of hospital beds.
(1) Payment may be
made for a hospital bed on a rental/purchase basis.
(2) The default certificate of medical
necessity (CMN) form is the ODM 02910, "Certificate of Medical Necessity:
Hospital Beds and Bed Accessories" (rev. 7/2018). The CMN
includes an attestation that at least one of the
following criteria is met:
(a) The
individual's condition (e.g., congestive heart failure, chronic obstructive
pulmonary disease, problems with aspiration, disease aggravated by excessive
body weight) necessitates elevation of the head or upper body to at least
thirty degrees, and such elevation cannot be achieved with pillows or wedges in
a standard bed;
(b) The individual
uses or will use traction equipment that can be attached only to a hospital
bed;
(c) The individual needs
additional height or support for safe transfer to a chair, wheelchair, or
standing position; or
(d) The
elevating functions of a hospital bed will facilitate frequent intervention by
an assistant or caregiver to alleviate pain or prevent pressure
sores.
(3) Documentation
of medical necessity
is needed for any additional feature that is
requested (e.g., powered elevation, powered height adjustment, heavy-duty or
extra-heavy-duty construction, extra width).
(a) A heavy-duty hospital bed may be
indicated for an individual weighing more than three hundred fifty
pounds.
(b) An extra-heavy-duty
hospital bed may be indicated for an individual weighing more than six hundred
pounds.
(C) Coverage of bed accessories.
(1)
The default
form is the ODM 02910.
(2)
Payment may be
made for an accessory to be used
with a hospital bed
only if the medical necessity of the hospital bed
has been established.
(D) Coverage of pressure-reducing support surfaces.
(1) The default CMN form is the ODM
02904, "Certificate of Medical Necessity: Pressure-Reducing Support Surfaces"
(rev. 7/2018).
(2) For a group 1
surface, the CMN
includes an attestation that at least one of the
following criteria is met:
(a) The individual
cannot make changes in body position without assistance;
(b) The individual cannot independently make
changes in body position sufficient to alleviate pressure;
(c) The individual has a pressure sore (of
any stage) on the trunk or pelvis; or
(d) The individual's circulation is
compromised.
(3) For a
group 2 surface, the CMN
includes the following information:
(a) If the individual underwent a surgical
procedure involving the closure of a wound with a skin graft or skin flap
within the thirty days preceding placement of the surface, an attestation to
the surgery;
(b) An attestation
that at least one of the following criteria is met:
(i) The individual has a stage III or stage
IV pressure sore on the trunk;
(ii)
The individual has multiple stage II wounds;
(iii) The individual has third-degree burns
(irrespective of whether grafting has been performed); or
(iv) Within the sixty days preceding
placement
of the surface or (if applicable) submission of the
request for prior authorization, the individual underwent a surgical
procedure involving the closure of a wound with a skin graft or skin flap;
and
(c) A description of
the treatment protocol.
(4) For a group 3 surface, the following
information
is included on the CMN directly or by attachment:
(a) An attestation that the individual is
being treated for a stage III or stage IV wound;
(b) A detailed description of the wound,
prepared by a qualified health practitioner within the twenty-one days
preceding placement of the surface, that specifies location, length, width,
depth, and overall appearance and characteristics;
(c) A record of the individual's body weight
taken intermittently over a period of at least sixty days preceding placement
of the surface;
(d) The results of
blood tests performed
within the twenty-one days preceding placement of the
surface, including the following levels:
(i) Serum protein;
(ii) Serum albumin or prealbumin;
(iii) Hemoglobin; and
(iv) Hematocrit; and
(e) A current, comprehensive nutritional
assessment of the individual, performed by a registered dietitian or licensed
dietitian.
(5) The
department may determine the length of an initial rental period and any
subsequent rental periods.
(E) Constraints and limitations.
(1) A bed does not qualify as a
hospital bed if it has no elevating function or if its elevating function is
not needed.
(2)
Prior
authorization of payment for a group 3 support surface may be denied if
its use is contraindicated by factors such as but not limited to the following
examples:
(a) Treatment protocols that involve
significant quantities of moisture;
(b) Inability of the individual or an
assistant to operate the equipment safely;
(c) Inadequate structure to support the
weight of the equipment; or
(d)
Insufficient electrical supply.
Disclaimer: These regulations may not be the most recent version. Ohio may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.