Ohio Administrative Code
Title 4101:4 - Boiler Inspection: Ohio Boiler and Pressure Vessel Rules
Chapter 4101:4-4 - Specifications
Section 4101:4-4-05 - Clearances

Universal Citation: OH Admin Code 4101:4-4-05
Current through all regulations passed and filed through September 16, 2024

When boilers are replaced or when new boilers are installed in either existing or new buildings, a minimum clear space of three feet is to be provided on the control and service sides of the boiler. All other sides are to comply with the boiler manufacturer's installation instructions for clearances to combustible materials. All boilers are to be so located that adequate space will be provided for the proper operation of the boiler and its appurtenances, for the inspection of all surfaces, tubes, water walls, economizer piping, valves, and other equipment, and for their necessary maintenance and repair.

Disclaimer: These regulations may not be the most recent version. Ohio may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.