Ohio Administrative Code
Title 3796:2 - Cultivators
Chapter 3796:2-2 - Cultivator Operations
Section 3796:2-2-06 - Laboratory testing

Universal Citation: OH Admin Code 3796:2-2-06

Current through all regulations passed and filed through September 16, 2024

(A) An employee of a licensed testing laboratory shall select a random sample of adequate weight from every batch of medical marijuana cultivated at the facility that is sufficient to perform the required tests, prior to packaging any plant material intended to be sold to a patient or caregiver through a dispensary licensed under Chapter 3796. of the Revised Code. Every sample shall be tested by a licensed testing laboratory in accordance with testing standards established for testing laboratories in the rules promulgated pursuant to Chapter 3796. of the Revised Code. At a minimum, a testing laboratory shall test every sample for the following:

(1) Microbial contaminants;

(2) Mycotoxins;

(3) Moisture content;

(4) Foreign matter contamination;

(5) Heavy metals, including, at a minimum, arsenic, cadmium, lead, and mercury;

(6) Pesticide and fertilizer residue; and

(7) Cannabinoid potency, including, at a minimum, the following:
(a) Delta-8-tetrahydrocannabinol;

(b) Delta-8-tetrahydrocannabinolic acid;

(c) Delta-9-tetrahydrocannabinol;

(d) Delta-9-tetrahydrocannabinolic acid;

(e) Cannabidiol (CBD);

(f) Cannabidiolic acid (CBDA);

(g) THC content as defined in rule 3796:1-1-01 of the Administrative Code;

(h) Cannabinol (CBN); and

(i) Any other cannabinoid determined by the department.

(B) An employee of a licensed testing laboratory shall select a random sample of adequate weight from every batch of medical marijuana cultivated at the facility that is sufficient to perform the required tests, prior to packaging any plant material that shall be used in the manufacture of medical marijuana products by a processor licensed under Chapter 3796. of the Revised Code. Every sample shall be tested by a licensed testing laboratory in accordance with testing standards established for testing laboratories in the rules promulgated pursuant to Chapter 3796. of the Revised Code. At a minimum, a testing laboratory shall test every sample for the following:

(1) Pesticide and fertilizer residue;

(2) Moisture content;

(3) Foreign matter contamination; and

(4) Cannabinoid potency, including, at a minimum, the following:
(a) Delta-8-tetrahydrocannabinol;

(b) Delta-8-tetrahydrocannabinolic acid;

(c) Delta-9-tetrahydrocannabinol;

(d) Delta-9-tetrahydrocannabinolic acid;

(e) Cannabidiol (CBD);

(f) Cannabidiolic acid (CBDA);

(g) THC content as defined in rule 3796:1-1-01 of the Administrative Code;

(h) Cannabinol (CBN); and

(i) Any other cannabinoid determined by the department.

(C) A licensed testing laboratory shall submit to the cultivator an analysis of every sample of medical marijuana tested by the testing laboratory in accordance with the rules promulgated pursuant to Chapter 3796. of the Revised Code. A cultivator shall not sell or otherwise distribute medical marijuana unless the medical marijuana meets the standards set forth by the department and the package or label contains the analysis from a licensed testing laboratory.

Disclaimer: These regulations may not be the most recent version. Ohio may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.