Ohio Administrative Code
Title 3745 - Ohio Environmental Protection Agency
Chapter 3745-69 - Miscellaneous Treatment Methods
Section 3745-69-03 - Inspections
Universal Citation: OH Admin Code 3745-69-03
Current through all regulations passed and filed through December 16, 2024
(A) The owner or operator of a treatment facility shall inspect, where present:
(1) Discharge control and safety equipment,
including, but not limited to, waste feed cutoff systems, bypass systems,
drainage systems, and pressure relief systems at least once each operating day,
to ensure that such systems are in good working order;
(2) Data gathered from monitoring equipment
(e.g., pressure and temperature gauges), at least once each operating day, to
ensure that the treatment process or equipment is being operated according to
its design;
(3) The construction
materials of the treatment process or equipment, at least weekly, to detect
corrosion or leaking of fixtures or seams; and
(4) The construction materials of, and the
area immediately surrounding, discharge confinement structures (e.g., dikes),
at least weekly, to detect erosion or obvious signs of leakage (e.g., wet spots
or dead vegetation).
(B) As required by paragraph (C) of rule 3745-65-15 of the Administrative Code, the owner or operator shall remedy any deterioration or malfunction.
Disclaimer: These regulations may not be the most recent version. Ohio may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.