(B)
Approval. The
director shall not approve an application for a class I scrap tire recovery
facility permit to install or a class II scrap tire recovery facility
registration certificate unless the director determines all of the
following:
(1)
General criteria.
(a)
The establishment or modification and operation of the
scrap tire recovery facility will not violate Chapter 3704., 3734., 3745., or
6111. of the Revised Code and the rules adopted thereunder.
(b)
An applicant or
person listed as the owner or operator of the scrap tire recovery facility is
in substantial compliance with, or is on a legally enforceable schedule through
issuance of an administrative consent order or judicial consent order to attain
compliance with applicable provisions of Chapters 3704., 3714., 3734., 3745.,
and 6111. of the Revised Code at scrap tire transportation operations,
construction and demolition debris facilities, construction and demolition
debris processing facilities, or solid waste facilities they own or operate. An
applicant or person listed as the owner or operator is not in substantial
compliance with Chapters 3704., 3714., 3734., 3745., and 6111. of the Revised
Code if the applicant has committed a significant or material violation of an
environmental law or has committed numerous, other violations of environmental
laws such that the violations reveal a practice of noncompliance with
environmental laws.
(c)
The applicant or person listed as the owner or operator
has maintained a history of compliance with Chapters 3704., 3714., 3734.,
3745., and 6111. of the Revised Code by resolving all administrative and
judicial enforcement actions that were brought against them that were based on
a significant or material violation of an environmental law, or were based on
numerous, other violations of environmental laws that revealed a practice of
noncompliance with environmental laws at scrap tire transportation operations,
construction and demolition debris facilities, construction and demolition
debris processing facilities, or solid waste facilities they own or operate or
at scrap tire transportation operations, construction and demolition debris
facilities, construction and demolition debris processing facilities, or solid
waste facilities they have previously owned or operated. For purposes of this
rule, an enforcement action has been resolved if the owner or operator has
entered into an administrative consent order or judicial consent order with
regard to the violation of environmental laws, or the owner or operator has
adjudicated the issue of whether they are in violation of environmental laws to
finality.
(d)
For an initial application, the applicant has submitted
a draft financial assurance instrument and the closure cost estimate calculated
in accordance with rules
3745-503-05 and
3745-580-22 of the
Administrative Code.
(e)
For an application submitted for a modification, the
applicant has submitted the closure cost estimate calculated in accordance with
rule 3745-580-22 of the
Administrative Code.
(2)
Siting
criteria.
(a)
The proposed scrap tire handling area is not located within
the following:
(i)
One thousand feet of a park in existence on the date of
receipt of the application by Ohio EPA. The one thousand foot setback does not
apply if the applicant obtains a written agreement from the owner or the
designated authority of the park to locate the scrap tire handling area within
one thousand feet of the park. The agreement shall be effective not later than
the issuance date of the permit to install or registration
certificate.
(ii)
One thousand feet from the boundaries of the following
natural areas in existence on the date of receipt of the application by Ohio
EPA:
(a)
Areas
designated by the Ohio department of natural resources as either a state nature
preserve, a state wildlife area, or a state wild, scenic or recreational river
area, including areas designated by section
1517.05 or
1547.81 of the Revised
Code.
(b)
Areas designated, owned, and managed by the Ohio
history connection as a nature preserve.
(c)
Areas designated
by the United States department of the interior as either a national wildlife
refuge or a national wild, scenic, or recreational river.
(d)
Areas designated
by the United States forest service as either a special interest area or a
research natural area in the Wayne national forest.
(e)
Stream segments
designated by Ohio EPA as either a state resource water, a coldwater habitat,
or an exceptional warmwater habitat.
(b)
The proposed
outdoor scrap tire storage areas are not located within the following:
(i)
One hundred feet
of the facility property line or from buildings or structures not owned or
leased by the owner or operator of the scrap tire recovery
facility.
(ii)
Five hundred feet of a domicile not owned or leased by
the owner or operator of the scrap tire recovery facility or within two hundred
feet of a domicile owned or leased by the owner or operator of the scrap tire
recovery facility, unless all scrap tire storage areas located outside an
enclosed building are separated from any such buildings or structures by an
earthen berm, or by a building or structure owned or leased by the scrap tire
recovery facility owner or operator, at least one and one half times the
maximum height of the scrap tire storage pile.
(iii)
Two hundred
feet from any surface waters of the state unless the proposed outdoor scrap
tire storage areas are separated from the surface water of the state by an
earthen berm of sufficient height to control runoff from a fire at the
facility.
(iv)
Under bridges, elevated trestles, elevated roadways,
elevated railroads, or electrical power lines having a voltage in excess of
seven hundred fifty volts or that supply power to fire emergency
systems.
(c)
The scrap tire recovery facility is not located in a
regulatory floodplain.
(3)
Additional
criteria.
(a)
For a class I scrap tire recovery facility permit to
install, the applicant meets the requirements of sections
3734.40 to
3734.47 of the Revised Code and
the rules adopted thereunder.
(b)
For a class I
scrap tire recovery facility, the scrap tire storage area will not exceed the
following:
(i)
Twenty thousand square feet of whole, cut, baled, and rough
shredded scrap tires.
(ii)
Twenty thousand square feet of TDF and
TDC.
(iii)
Twenty thousand square feet of by-products and
residuals from scrap tires, all component parts, partially assembled and fully
assembled products made from scrap tires, and other processed scrap tire
products other than TDF and TDC, including but not limited to crumb
rubber.
(c)
For a class II scrap tire recovery facility, the total
scrap tire storage area will not exceed the following:
(i)
Ten thousand
square feet of whole, cut, baled, and rough shredded scrap
tires.
(ii)
Ten thousand square feet of TDF and
TDC.
(iii)
Ten thousand square feet of by-products and residuals
from scrap tires, all component parts, partially assembled and fully assembled
products made from scrap tires, and other processed scrap tire products other
than TDF and TDC, including but not limited to crumb rubber.