Ohio Administrative Code
Title 3745 - Ohio Environmental Protection Agency
Chapter 3745-555 - Solid Waste Transfer Facilities
Section 3745-555-216 - Leachate holding tanks

Universal Citation: OH Admin Code 3745-555-216

Current through all regulations passed and filed through December 16, 2024

[Comment: Pursuant to rule 3745-42-11 of the Administrative Code, industrial waste holding tanks, including leachate holding tanks, are also required to obtain a permit through Ohio EPA, division of surface water.]

This rule is applicable as specified in rule 3745-555-200 of the Administrative Code.

(A) Metal leachate holding tanks shall incorporate corrosion protection.

(B) Leachate load-out facilities shall be designed to meet the following:

(1) Be protected from damage caused by freezing and facility operations.

(2) Prevent releases of leachate from load-out facilities.

(3) Contain spills and facilitate spill cleanup.

Effective: 4/1/2017
Five Year Review (FYR) Dates: 04/01/2022
Promulgated Under: 119.03
Statutory Authority: 3734.02
Rule Amplifies: 3734.02

Disclaimer: These regulations may not be the most recent version. Ohio may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.