Ohio Administrative Code
Title 3745 - Ohio Environmental Protection Agency
Chapter 3745-555 - Solid Waste Transfer Facilities
Section 3745-555-210 - Waste handling floor design

Universal Citation: OH Admin Code 3745-555-210

Current through all regulations passed and filed through December 16, 2024

This rule is applicable as specified in rule 3745-555-200 of the Administrative Code.

The waste handling floor of the solid waste transfer facility shall be designed to do the following:

(A) Be capable of withstanding the forces and loads encountered during normal transfer facility operations.

(B) Collect and drain leachate and prevent any unauthorized discharge of leachate from the transfer facility. At a minimum, the design of the waste handling floor shall meet the following criteria:

(1) Include leachate collection points of sufficient size to accommodate the amount of leachate generated from waste handling and wet cleanup operations. The leachate collection points shall be connected to leachate conveyance pipes.

(2) Be sloped to direct leachate to the leachate collection points and not allow ponding of leachate.

(3) Prevent any unauthorized discharge of leachate from the waste handling area.

Effective: 4/1/2017
Five Year Review (FYR) Dates: 04/01/2022
Promulgated Under: 119.03
Statutory Authority: 3 73 4.02
Rule Amplifies: 3734.02

Disclaimer: These regulations may not be the most recent version. Ohio may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.