Ohio Administrative Code
Title 3745 - Ohio Environmental Protection Agency
Chapter 3745-512 - Construction
Section 3745-512-50 - Construction certification
Universal Citation: OH Admin Code 3745-512-50
Current through all regulations passed and filed through December 16, 2024
(A) For each engineered component at the facility, the owner or operator shall demonstrate the following through a construction certification report:
(1)
Compliance with
the facility design in the authorizing document.
(2)
The engineered
component was installed in a manner that did not damage the engineered
component or other engineered components.
(3)
Compliance with
the construction requirements in this chapter for the engineered
component.
(B) The construction certification report shall be signed and sealed by a professional engineer.
(C) Each construction certification report shall include the following:
(1)
A narrative
section that identifies the engineered components that were constructed during
the construction event, which shall include the following:
(a)
A comparison of
each constructed engineered component to the design and any material or
construction specification in the authorizing document and to the material and
construction specifications in this chapter.
(b)
A summary of how
construction was impacted by weather, equipment limitations, and any other
difficulty that was encountered.
(2)
All alterations
and alternatives that relate to the installation of any engineered component to
be certified, and to be presented as follows:
(a)
A listing of all
alterations previously concurred with and all alternatives previously
approved.
(b)
All alteration requests which are proposed for
concurrence. The alteration request shall conform to the requirements in rule
3745-512-55 of the
Administrative Code.
(3)
The certification
requirements for each engineered component constructed during the construction
event in accordance with rules 3745-512-110 to
3745-512-460 of the
Administrative Code and in accordance with any requirement in the authorizing
document, which shall include the following:
(a)
Test results
including all passing, failing, and inconclusive test results.
(b)
All survey
information, which shall be signed and sealed by a professional
surveyor.
(4)
A demonstration that the integrity of the engineered
components was maintained, including references to construction activity
logs.
(5)
If any oil or gas well was plugged and abandoned, a
demonstration of compliance with paragraph (C) of rule
3745-512-30 of the
Administrative Code.
(6)
Verification that whenever equipment is used to test an
engineered component, the equipment is properly calibrated in accordance with
the manufacturer's recommendations and specifications.
(7)
A description of
the experience, training, responsibilities in decision making, and any other
qualifications of the personnel who provided construction oversight and
conducted all of the testing on the engineered components for which the
certification report is being submitted.
(8)
A certification
statement and signature in accordance with rule
3745-500-50 of the
Administrative Code.
Disclaimer: These regulations may not be the most recent version. Ohio may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
