Ohio Administrative Code
Title 3745 - Ohio Environmental Protection Agency
Chapter 3745-51 - Identification and Listing of Hazardous Waste
Section 3745-51-20 - Characteristics of hazardous waste- general

Universal Citation: OH Admin Code 3745-51-20

Current through all regulations passed and filed through March 18, 2024

(A) A "waste," as defined in rule 3745-51-02 of the Administrative Code, which is not excluded from regulation as a hazardous waste under paragraph (B) of rule 3745-51-04 of the Administrative Code, is a hazardous waste if the waste exhibits any of the characteristics identified in rules 3745-51-20 to 3745-51-24 of the Administrative Code.

[Comment: Rule 3745-52-11 of the Administrative Code provides the generator's responsibility to determine whether his waste exhibits one or more of the characteristics identified in rules 3745-51-20 to 3745-51-24 of the Administrative Code.]

(B) A hazardous waste which is identified by a characteristic identified in rules 3745-51-20 to 3745-51-24 of the Administrative Code is assigned every EPA hazardous waste number that is applicable as identified in rules 3745-51-20 to 3745-51-24 of the Administrative Code. This number shall be used in complying with the requirement to notify Ohio EPA or U.S. EPA of regulated waste activity and all applicable recordkeeping and reporting requirements of Chapters 3745-52, 3745-53, 3745-54 to 3745-57, 3745-65 to 3745-69, 3745-205, 3745-256, 3745-266, and 3745-270, and rules 3745-50-40 to 3745-50-235 of the Administrative Code.

(C) For the purposes of rules 3745-51-20 to 3745-51-24 of the Administrative Code, the director will consider a sample obtained using any of the applicable sampling methods specified in the appendix to this rule to be a representative sample within the meaning of Chapter 3745-50 of the Administrative Code.

[Comment 1: Since the sampling methods in the appendix to this rule are not formally adopted by Ohio EPA, a person who wishes to employ an alternative sampling method, including previously approved equivalent ASTM methods, is not required to demonstrate the equivalency of that method under the procedures in 40 CFR 260.20 and 40 CFR 260.21.]

[Comment 2: For dates of non-regulatory government publications, publications of recognized organizations and associations, federal rules, and federal statutory provisions referenced in this rule, see rule 3745-50-11 of the Administrative Code titled "Incorporated by reference."]

Click to view Appendix

Disclaimer: These regulations may not be the most recent version. Ohio may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.