Ohio Administrative Code
Title 3745 - Ohio Environmental Protection Agency
Chapter 3745-34 - Underground Injection Control Program
Section 3745-34-58 - Reporting requirements
Universal Citation: OH Admin Code 3745-34-58
Current through all regulations passed and filed through December 16, 2024
(A) The owner or operator of a class I hazardous waste injection well shall submit a report to the director each calendar quarter, in writing, including:
(1)
The maximum injection pressure; and
(2) A description of any event that exceeds
operating parameters for annulus pressure or injection pressure as specified in
the permit; and
(3) A description
of any event which triggers an alarm or shutdown device required by rule
3745-34-56 of the Administrative
Code and the owner or operators response; and
(4) The total volume of fluid injected; and
(5) Any change in the annular
fluid volume; and
(6) The physical,
chemical and other relevant characteristics of injected fluids; and
(7) The results of monitoring required under
rule 3745-34-57 of the Administrative
Code.
(B) The owner or operator of a class I hazardous waste injection well shall report to the director within thirty days or with the next quarterly report whichever comes later, the results of:
(1) Periodic tests of
mechanical integrity; and
(2) Any
other test of the injection well conducted by the permittee if required by the
director; and
(3) Any well work
over.
Disclaimer: These regulations may not be the most recent version. Ohio may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.