Ohio Administrative Code
Title 3745 - Ohio Environmental Protection Agency
Chapter 3745-31 - Permit-to-Install New Sources and Permit-to-Install and Operate Program
Section 3745-31-16 - Attainment provisions - major stationary source impact analysis
Current through all regulations passed and filed through December 16, 2024
[Comment: For dates and availability of non-regulatory government publications, publications of recognized organizations and associations, federal rules, and federal statutory provisions referenced in this rule, see paragraph (AA) of rule 3745-31-01 of the Administrative Code titled, "referenced materials."]
(A) Applicability.
This rule applies to any major stationary source or major modification that is to be constructed in an area designated in 40 CFR 81.336 as attainment for an air pollutant for which the major stationary source or major modification is major.
(B) Impact analysis.
Any owner or operator of a proposed major stationary source or major modification shall demonstrate that allowable emissions increases from the proposed major stationary source or major modification, in conjunction with all other applicable emissions increases or reductions, including secondary emissions, would not cause or contribute to air pollution in violation of:
(C) Significant impact levels.
For purposes of PM 2.5, the demonstration required in paragraph (B) of this rule is deemed to have been made if the emissions increase from the new stationary source alone or from the modification alone would cause, in all areas, air quality impacts less than the following amounts:
|
Pollutant |
Averaging time |
Class I area |
Class II area |
Class III area |
|
PM 2.5 |
Annual |
0.06 µg/m3 |
0.3 µg/m3 |
0.3 µg/m3 |
|
24-hour |
0.07 µg/3 |
1.2 µg/m3 |
1.2 µg/m3 |
