Ohio Administrative Code
Title 3745 - Ohio Environmental Protection Agency
Chapter 3745-21 - Carbon Monoxide, Ozone, Hydrocarbon Air Quality Standards, and Related Emission Requirements
Section 3745-21-04 - Compliance time schedules

(1) Except as otherwise provided in paragraphs (B)(2) to (B)(4), and (B)(7) of this rule, by no later than December 1, 1979 for any air contaminant source subject to paragraphs (C) to (S) of rule 3745-21-09 of the Administrative Code, by no later than April l, 1981 for any air contaminant source subject to paragraphs (T) to (AA) of rule 3745-21-09 of the Administrative Code, by no later than June 1, 1986 for any air contaminant source subject to paragraphs (BB) to (EE) of rule 3745-21-09 of the Administrative Code, by no later than June 1, 1988 for any air contaminant source subject to paragraphs (FF) to (PP) of rule 3745-21-09 of the Administrative Code, and by no later than May 1, 1993 for any air contaminant source subject to paragraphs (QQ) to (DDD) of rule 3745-21-09 of the Administrative Code, any owner or operator of said air contaminant source shall comply with one of the following:

(2) The certification or operating permit application required by paragraph (B)(1) of this rule shall not apply to any air contaminant sources subject exclusively to paragraph (N) or (V) of rule 3745-21-09 of the Administrative Code (pertaining to cutback asphalts and gasoline tank trucks).

(3) For any air contaminant source subject to the following:

(4) For any air contaminant source subject to paragraphs (C)(3)(d) and (C)(28)(d) of this rule, a certification or operating permit application shall be submitted in accordance with paragraphs (B)(1)(a) and (B)(1)(b) of this rule by no later than March 1, 1995.

(5) In demonstrating compliance pursuant to paragraph (B)(1)(a) of this rule, the owner or operator of a source shall utilize the test methods and procedures specified in rule 3745-21-10 of the Administrative Code. In addition, for any source that is located within one of the counties specified in paragraph (A) of rule 3745-21-09 of the Administrative Code, employs add-on controls to comply with rule 3745-21-09 of the Administrative Code, and has not been tested since January 1, 1991, the owner or operator of such source shall conduct emission tests in accordance with the methods specified in rule 3745-21-10 of the Administrative Code to demonstrate compliance with rule 3745-21-09 of the Administrative Code. The emission tests shall be conducted by January 17, 1996. For the purpose of complying with the emission test requirement specified in this paragraph, the Ohio EPA may accept an emission test conducted prior to January 1, 1991, if the owner or operator provides information and data to the Ohio EPA which demonstrate that the test was witnessed by the Ohio EPA or its delegated agent, that an approved USEPA emission test method was employed, and that the operation of the source was consistent with the current source operating conditions and operating capacity. For each coating employed in any coating line that is located within one of the counties specified in paragraph (A) of rule 3745-21-09 of the Administrative Code and is subject to rule 3745-21-09 of the Administrative Code, the owner or operator shall demonstrate compliance with any applicable VOC content limitation specified in rule 3745-21-09 of the Administrative Code using USEPA method 24 (for coatings) or USEPA method 24A (for flexographic and rotogravure printing inks and related coatings). If any such coating has not been analyzed using USEPA method 24 or USEPA method 24A since January 1, 1991, the owner or operator shall either conduct a USEPA method 24 or USEPA method 24A analysis of the coating or obtain a USEPA method 24 or USEPA method 24A analysis of the coating from the coating supplier by January 17, 1996. If, pursuant to section 11.4 of USEPA method 24, as contained in 40 CFR part 60 appendix A, an owner or operator determines that USEPA method 24 or USEPA method 24A cannot be used for a particular coating or ink, the owner or operator shall so notify the administrator of the USEPA and shall use formulation data for that coating or ink to demonstrate compliance until the USEPA provides alternative analytical procedures or alternative precision statements for USEPA method 24 or USEPA method 24A.

(6) The owner or operator of a source that is subject to rule 3745-21-09 of the Administrative Code shall notify the director in writing at least thirty days before any impending change in the method of complying with said requirements.

(7) For any air contaminant source subject to paragraph (C)(28)(e) of this rule a compliance certification or compliance program, along with an operating permit application, if appropriate, shall be submitted in accordance with paragraphs (B)(1)(a) and (B)(1)(b) of this rule by no later than August 15, 1999. For any air contaminant source subject to paragraph (C)(28)(e) of this rule and located at a facility subject to Chapter 3745-77 of the Administrative Code, an operating permit application is not required.

(1) No owner or operator may cause, permit, or allow the operation or other use of any air contaminant source in violation of the limitations specified in rule 3745-21-07 or 3745-21-08 of the Administrative Code beyond April 15, 1977.

(2) Except as otherwise provided in paragraphs (C)(21) to (C)(26) and (C)(35) of this rule, any owner or operator of an automobile or light-duty truck assembly plant which is subject to paragraph (C) of rule 3745-21-09 of the Administrative Code shall achieve compliance with said requirements by December 1, 1982.

(3) Can coating lines.

(4) Coil coating lines.

(5) Paper coating lines.

(6) Fabric coating lines.

(7) Any owner or operator of a vinyl coating line which is subject to paragraph (H) of rule 3745-21-09 of the Administrative Code shall achieve compliance with said requirements by April 1, 1982.

(8) Metal furniture coating lines.

(9) Magnet wire coating lines.

(10) Large appliance coating lines.

(11) Any owner or operator of a fixed roof tank which is subject to paragraph (L) of rule 3745-21-09 of the Administrative Code shall achieve compliance with said requirements by January 1, 1982.

(12) Any owner or operator of a refinery vacuum producing system which is subject to paragraph (M)(1) of rule 3745-21-09 of the Administrative Code shall achieve compliance with said requirements by December 31, 1982.

(13) Any owner or operator of a refinery wastewater separator which is subject to paragraph (M)(2) of rule 3745-21-09 of the Administrative Code shall achieve compliance with said requirements by January 1, 1981.

(14) Any owner or operator of a refinery process unit turnaround which is subject to paragraph (M)(3) of rule 3745-21-09 of the Administrative Code shall achieve compliance with said requirements by December 31, 1982.

(15) Paragraph (N) of rule 3745-21-09 of the Administrative Code shall be complied with by the following deadlines:

(16) Solvent metal cleaning operations.

(17) Any owner or operator of a bulk gasoline plant which is subject to paragraph (P) of rule 3745-21-09 of the Administrative Code shall achieve compliance with said requirements by July 1, 1981.

(18) Any owner or operator of a bulk gasoline terminal which is subject to paragraph (Q) of rule 3745-21-09 of the Administrative Code shall achieve compliance with said requirements by July 1, 1981.

(19) Any owner or operator of a gasoline dispensing facility which is subject to paragraph (R) of rule 3745-21-09 of the Administrative Code shall achieve compliance with said requirements no later than the deadlines in the following schedules:

(20) "Associated Materials," facility ID 1677000053, or any subsequent owner or operator of the "Associated Materials" facility located at 3773 State road, Cuyahoga Falls, Ohio shall achieve compliance with paragraph (E) of rule 3745-21-09 of the Administrative Code by July 1, 1979, and paragraph (S) of rule 3745-21-09 of the Administrative Code by July 1, 1981.

(21) "Lordstown Motors Corp.," facility ID 0278000199, or any subsequent owner or operator of the "Lordstown Motors Corp." automobile assembly plant located at 2200 Hallock Young road, Lordstown, Ohio shall achieve compliance with paragraph (C)(1)(a)(i) of rule 3745-21-09 of the Administrative Code by December 31, 1982; and paragraphs (C)(1)(a)(ii), (C)(1)(c) and (C)(1)(d) of rule 3745-21-09 of the Administrative Code by December 31, 1985.

(22) "Lordstown Motors Corp.," facility ID 0278000199, or any subsequent owner or operator of the "Lordstown Motors Corp." light-duty truck assembly plant located at 2200 Hallock Young road, Lordstown, Ohio shall achieve compliance with paragraph (C)(1)(a)(i) of rule 3745-21-09 of the Administrative Code by December 31, 1982; and paragraphs (C)(1)(a)(ii), (C)(1)(c) and (C)(1)(d) of rule 3745-21-09 of the Administrative Code by December 31, 1984.

(23) [Reserved.]

(24) [Reserved.]

(25) "Ford Motor Company - Ohio Assembly Plant", facility ID 0247030471, or any subsequent owner or operator of the "Ford Motor Company - Ohio Assembly Plant" light-duty truck assembly plant located at 650 Miller road, Avon Lake, Ohio shall achieve compliance with paragraph (C)(1)(a)(i) of rule 3745-21-09 of the Administrative Code by December 31, 1982; and paragraphs (C)(1)(a)(ii), (C)(1)(c) and (C)(1)(d) of rule 3745-21-09 of the Administrative Code by December 31, 1986.

(26) [Reserved.]

(27) Any owner or operator of petroleum refinery equipment which is subject to paragraph (T) of rule 3745-21-09 of the Administrative Code shall submit to the director a monitoring program by July 1, 1981, and the first quarterly monitoring report by October 15, 1981.

(28) Miscellaneous metal part or product coating lines.

(29) Any owner or operator of a gasoline tank truck which is subject to paragraph (V) of rule 3745-21-09 of the Administrative Code shall achieve compliance with said requirements by March 31, 1983.

(30) Any owner or operator of a synthesized pharmaceutical manufacturing facility which is subject to paragraph (W) of rule 3745-21-09 of the Administrative Code shall achieve compliance with said requirements by December 31, 1982.

(31) Any owner or operator of a pneumatic rubber tire manufacturing facility which is subject to paragraph (X) of rule 3745-21-09 of the Administrative Code shall achieve compliance with said requirements by December 31, 1982.

(32) Any owner or operator of a packaging rotogravure printing line, publication rotogravure printing line, or flexographic printing line which is subject to the following:

(33) Any owner or operator of an external floating roof tank which is subject to paragraph (Z) of rule 3745-21-09 of the Administrative Code shall achieve compliance with said requirements by December 31, 1982.

(34) [Reserved.]

(35) "Honda of America Mfg., Inc, Marysville Auto Plant.", facility ID 0180010193, or any subsequent owner or operator of the "Honda of America Mfg., Inc., Marysville Auto Plant" automobile assembly plant located at 24000 Honda Parkway (U.S. route 33), Marysville, Ohio shall achieve compliance with paragraphs (C)(1)(c) and (C)(1)(d) of rule 3745-21-09 of the Administrative Code by December 31, 1986.

(36) Any owner or operator of a petroleum dry cleaning facility which is subject to paragraph (BB) of rule 3745-21-09 of the Administrative Code shall achieve compliance with said requirements by December 31, 1987.

(37) Any owner or operator of a continuous, polystyrene resin manufacturing process which is subject to paragraph (CC) of rule 3745-21-09 of the Administrative Code shall achieve compliance with said requirements by December 31, 1987.

(38) Except as otherwise provided in paragraph (C)(66) of this rule, any owner or operator of a process unit which produces organic chemicals and which is subject to paragraph (DD) of rule 3745-21-09 of the Administrative Code shall achieve compliance with paragraph (DD)(2) of rule 3745-21-09 of the Administrative Code by February 1, 1987, and paragraphs (DD)(3) to (DD)(6) of rule 3745-21-09 of the Administrative Code by July 1, 1987.

(39) Except as otherwise provided in paragraph (C)(66) of this rule, any owner or operator of an air oxidation process which is subject to paragraph (EE) of rule 3745-21-09 of the Administrative Code shall achieve compliance with said requirements by December 31, 1987.

(40) "Schlage Lock Company LLC," facility ID 1431050879, or any subsequent owner or operator of "Schlage Lock Company LLC" facility located at 9017 Blue Ash road, Cincinnati, Ohio shall achieve compliance with paragraph (FF)(1) of rule 3745-21-09 of the Administrative Code by April 1, 1989, and paragraph (FF) (2) of rule 3745-21-09 of the Administrative Code by April 1, 1989.

(41) [Reserved.]

(42) Any owner or operator of an automotive/transportation plastic parts coating line or a business machine plastic parts coating line which is subject to paragraph (HH) of rule 3745-21-09 of the Administrative Code shall achieve compliance with said requirements no later than August 25, 2009.

(43) [Reserved.]

(44) "OMNOVA Solutions Inc.", facility ID 1677010195, or any subsequent owner or operator of "OMNOVA Solutions Inc." facility located at 1380 Tech Way drive bldg 119, Akron, Ohio shall achieve compliance with paragraph (JJ) of rule 3745-21-09 of the Administrative Code by May 25, 1988.

(45) [Reserved.]

(46) "The Lubrizol Corporation", facility ID 0243000024, or any subsequent owner or operator of "The Lubrizol Corporation" facility located at 155 Freedom road, Painesville, Ohio shall achieve compliance with paragraph (LL) of rule 3745-21-09 of the Administrative Code by October 1, 1989.

(47) "PPG Industries Ohio, Inc.," facility ID 1318000101, or any subsequent owner or operator of the "PPG Industries Ohio, Inc. " facility located at 3800 West 143rd street, Cleveland, Ohio shall achieve compliance with paragraph (MM) of rule 3745-21-09 of the Administrative Code by May 25, 1988.

(48) "Von Roll USA, Inc.," facility ID 1318002663, or any subsequent owner or operator of the "Von Roll USA, Inc." facility located at 4853 West 130th street, Cleveland, Ohio shall achieve compliance with paragraph (NN) of rule 3745-21-09 of the Administrative Code no later than the deadlines in the following schedule:

(49) "AK Steel Corporation," facility ID 1409010006 or any subsequent owner or operator of the "AK Steel Corporation" facility located at 1801 Crawford street, Middletown, Ohio shall achieve compliance with paragraph (OO) of rule 3745-21-09 of the Administrative Code by March 31, 1993.

(50) "Formica Corporation - Evandale," facility ID 1431150801, or any subsequent owner or operator of the "Formica Corporation - Evandale" facility located at 10155 Reading road, Cincinnati, Ohio shall achieve compliance with paragraph (PP) of rule 3745-21-09 of the Administrative Code by May 25, 1988.

(51) "Day-Glo Color Corp.," facility ID 1318006552, or any subsequent owner or operator of the "Day-Glo Color Corp." facility located at 4515 St. Clair avenue, Cleveland, Ohio shall achieve compliance with paragraph (QQ) of rule 3745-21-09 of the Administrative Code by May 1, 1994.

(52) [Reserved.]

(53) [Reserved.]

(54) [Reserved.]

(55) "BP-Husky Refining LLC," facility ID 0448020007, or any subsequent owner or operator of the "BP-Husky Refining LLC" facility located at 4001 Cedar Point road, Oregon, Ohio shall achieve compliance with paragraph (UU)(1) of rule 3745-21-09 of the Administrative Code by May 1, 1995, paragraphs (UU)(2) and (UU)(3) of rule 3745-21-09 of the Administrative Code by May 1, 1993, paragraph (UU)(4) of rule 3745-21-09 of the Administrative Code by May 1, 1994, paragraph (UU)(5) of rule 3745-21-09 of the Administrative Code by October 1, 1993, and paragraph (UU)(6) of rule 3745-21-09 of the Administrative Code by January 1, 1995.

(56) "Marathon Petroleum Company LP - Canton Refinery," facility ID 1576002006, or any subsequent owner or operator of the "Marathon Petroleum Company LP - Canton Refinery" facility located at 2408 Gambrinus road, S.W., Canton, Ohio shall achieve compliance with paragraph (VV) of rule 3745-21-09 of the Administrative Code by March 31, 1993.

(57) [Reserved.]

(58) [Reserved.]

(59) "PMC Specialties Group," facility ID 1431390137, or any subsequent owner or operator of the "PMC Specialties Group" facility located at 501 Murray road, Cincinnati, Ohio shall achieve compliance with paragraph (YY)(1) of rule 3745-21-09 of the Administrative Code by March 31, 1993, and paragraph (YY)(2) of rule 3745-21-09 of the Administrative Code by May 1, 1994.

(60) "Firestone Polymers," facility ID 1677010000, or any subsequent owner or operator of the "Firestone Polymers" facility located at 381 West Wilbeth road, Akron, Ohio shall achieve compliance with paragraph (ZZ) of rule 3745-21-09 of the Administrative Code by May 1, 1994.

(61) [Reserved.]

(62) "Huntsman Advanced Materials Americas, LLC," facility ID 1677010029, or any subsequent owner or operator of the "Huntsman Advanced Materials Americas, LLC" facility located at 240 West Emerling avenue, Akron, Ohio shall achieve compliance with paragraph (BBB)(1) of rule 3745-21-09 of the Administrative Code by August 15, 1993, and paragraphs (BBB)(2) to (BBB) (4) of rule 3745-21-09 of the Administrative Code by December 15, 1994.

(63) [Reserved.]

(64) Any owner or operator of a gasoline dispensing facility which is subject to paragraph (DDD) of rule 3745-21-09 of the Administrative Code shall achieve compliance with said requirements no later than the following deadlines:

(65) Any owner or operator of an air contaminant source which is located in Ashtabula, Clark, Delaware, Geauga, Licking, or Miami county and which, prior to March 31, 1993, was exempt from paragraphs (C) to (M), (O) to (R), (T), (U), and (W) to (EE) of rule 3745-21-09 of the Administrative Code because the facility's potential to emit is less than one hundred tons of VOC per calendar year, shall achieve compliance with said requirements by April 1, 1995.

(66) "Georgia Pacific Chemicals LLC," facility ID 0125040904, or any subsequent owner or operator of the "Georgia Pacific Chemicals LLC" facility located at 1975 Watkins road, Columbus, Ohio shall achieve compliance with paragraphs (DD) and (EE) of rule 3745-21-09 of the Administrative Code for the process unit which produces urea-formaldehyde by May 1, 1994.