Ohio Administrative Code
Title 3745 - Ohio Environmental Protection Agency
Chapter 3745-104 - Accidental Release Prevention Program
Section 3745-104-19 - Program two prevention program: operating procedures

Universal Citation: OH Admin Code 3745-104-19

Current through all regulations passed and filed through September 16, 2024

(A) The owner or operator shall prepare written operating procedures that provide clear instructions or steps for safely conducting activities associated with each covered process consistent with the safety information for that process. Operating procedures or instructions provided by equipment manufacturers or developed by persons or organizations knowledgeable about the process and equipment may be used as a basis for a stationary source's operating procedures.

(B) The procedures shall address the following:

(1) Initial startup.

(2) Normal operations.

(3) Temporary operations.

(4) Emergency shutdown and operations.

(5) Normal shutdown.

(6) Startup following a normal or emergency shutdown or a major change that requires a hazard review.

(7) Consequences of deviations and steps required to correct or avoid deviations.

(8) Equipment inspections.

(C) The owner or operator shall ensure that the operating procedures are updated, if necessary, whenever a major change occurs and prior to startup of the changed process.

Disclaimer: These regulations may not be the most recent version. Ohio may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.