Ohio Administrative Code
Title 1501:9 - Division of Mineral Resources Management - Oil and Gas
Chapter 1501:9-10 - Pipelines
Section 1501:9-10-03 - Identification and location of pipelines

Universal Citation: OH Admin Code 1501:9-10-03
Current through all regulations passed and filed through September 16, 2024

Excluding all pipelines utilized in the actual drilling or operation of oil and/or natural gas well(s) and pipelines used to transport leasehold gas, no person may operate or cause to be operated an oil and/or natural gas pipeline used in the producing of oil and/or natural gas wells without first identifying the route of the pipeline on the surface of the ground in a manner customary to the industry. An accurate record or sketch showing the location, identification, type, and size of pipelines is to be kept on file at an office of an owner or the operator of the pipeline. Any changes in the location, identification, type, and size of pipelines is to be shown on a revised record or sketch and kept on file at an office of an owner of the pipeline.

Disclaimer: These regulations may not be the most recent version. Ohio may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.