Ohio Administrative Code
Title 1501:9 - Division of Mineral Resources Management - Oil and Gas
Chapter 1501:9-1 - Oil Well Drilling
Section 1501:9-1-07 - Prevention of contamination and pollution

Universal Citation: OH Admin Code 1501:9-1-07

Current through all regulations passed and filed through September 16, 2024

(A) All persons engaged in any phase of operation of any well or wells shall conduct such operation or operations in a manner which will not contaminate or pollute the surface of the land, or water on the surface or in the subsurface

(B) In urbanized areas, to minimize off-site sedimentation, erosion and to control the surface flow of water, the well owner and or authorized representative must follow the best management practices (BMPs) for oil and gas well site construction manual, as defined in rule 1501:9-1-01 of the Administrative Code. BMPs and other design standards other than provided by the chief maybe used if a well owner or their authorized representative demonstrates that the alternative BMP or practices minimize erosion to the same degree as the BMP's provided by the chief.

Disclaimer: These regulations may not be the most recent version. Ohio may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.