Ohio Administrative Code
Title 1501:10 - Division of Mineral Resources Management - Mine Safety
Chapter 1501:10-2 - Diesel Equipment in Underground Coal Mines
Section 1501:10-2-22 - General requirements for training diesel-powered equipment operators
Current through all regulations passed and filed through September 16, 2024
(A) To use diesel-powered equipment in an underground coal mine, the mine operator is to submit to the chief for approval a training plan for training equipment operators in the use of diesel-powered equipment and not allow any person who is not qualified under paragraph (D) or (G) of this rule to operate diesel-powered equipment in an underground coal mine.
(B) All training course instructors and all training plans set forth in this rule and rules 1501:10-2-23 and 1501:10-2-24 of the Administrative Code will be approved by the chief. Equipment operator training and qualification are to comply with this rule.
(C) Training will be conducted in the basics of the operation of diesel engines, federal and state regulations governing their use, company rules for safe operation, the specific features of each piece of equipment, and the ability to recognize problems. The mine operator is to provide this training to each equipment operator and, if applicable, to the mine's health and safety committee. This training is to be designed to bring every equipment operator to a level of good understanding of diesel- powered equipment operation. An equipment operator may attain qualification by attending a course of a minimum of eight hours, including formal classroom training on diesel fundamentals and equipment-specific hands-on training pursuant to rule 1501:10-2-23 of the Administrative Code.
(D) When an equipment operator successfully completes the classroom and hands-on training pursuant to paragraph (C) of this rule, the mine operator is to issue to the equipment operator a certificate of qualification that qualifies the equipment operator to operate a specific type of diesel-powered equipment. An equipment operator may be qualified to operate more than one type of equipment by successfully completing additional equipment-specific training that covers operational attributes specific to each additional type of diesel-powered equipment.
(E) All diesel-powered equipment operators are to take two hours of refresher training annually, unless the chief approves an alternative training schedule. This training is separate from MSHA 30 C.F.R. Part 48 training. The mine operator is to furnish all training and refresher training to be provided pursuant to this rule. The employees will suffer no loss of pay for attending training and refresher training.
(F) The training and refresher training conducted pursuant to paragraphs (C) and (E) of this rule are to include instruction in the following classroom subjects:
(G) Annual certificate of qualification. The mine operator is to issue to the equipment operator a new certificate of qualification each year after the equipment operator has successfully completed the annual refresher training pursuant to paragraph (E) of this rule. The mine operator is to keep at the mine site a copy of the most recent certificate of qualification issued to the equipment operator and make it available for inspection by the chief or his or her representative.
(H) For dates of federal rules referenced in this rule, see rule 1501:10-1-07 of the Administrative Code.