Ohio Administrative Code
Title 1501:10 - Division of Mineral Resources Management - Mine Safety
Chapter 1501:10-1 - Division of Mines and Reclamation-Mine Safety-Accident Reports; Investigations
Section 1501:10-1-02 - Fire detection devices

Universal Citation: OH Admin Code 1501:10-1-02

Current through all regulations passed and filed through September 16, 2024

This rule applies to operators of underground coal mines that use conveyor belts in the operation of the mine.

(A) The operator shall install fire detection devices on each conveyor belt that is used in the mine. With a design, type, number, installation and use of fire detection devices that provide for the earliest possible detection of a fire and meet the requirements of 30 C.F.R. 75.1103-1 to 30 C.F.R. 75.1103-8.

(B) The operator shall follow a procedure that meets the requirements of 30 C.F.R. 75.1103-8 for the inspection of the fire detection devices installed on each conveyor belt.

(C) Initial approval of fire detection devices.

(1) Existing underground coal operators. Within thirty days of the effective date of this rule, each existing underground coal operator is to submit a letter to the chief notifying the chief that the mine's fire detection devices have been installed in compliance with 30 C.F.R. 75.1103-1 to 30 C.F.R. 75.1103-8. The chief will inspect the fire detection devices, approve or disapprove the installation of the fire detection devices, and notify the operator of the chief's decision.

(2) New underground coal operators. A new underground coal operator is to submit to the chief a plan for fire detection devices that meets this rule. After the operator has installed the fire detection devices, he or she is to submit a letter to the chief notifying the chief that the mine's fire detection devices have been installed in compliance with 30 C.F.R. 75.1103-1 to 30 C.F.R. 75.1103-8. The chief will inspect the fire detection devices, approve or disapprove the installation of the fire detection devices, and notify the operator of the chief's decision.

(D) Modifications to fire detection devices. When an operator submits a proposed revision or modification to a mine's fire detection devices to MSHA for approval, the operator is to at the same time submit this proposed revision or modification to the chief for approval. The chief will review the proposed revision or modification, approve or disapprove it, and notify the operator of the chief's decision.

Disclaimer: These regulations may not be the most recent version. Ohio may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.