North Dakota Administrative Code
Title 8 - Architecture, Board of
Article 8-06 - Miscellaneous Provisions
Chapter 8-06-01 - Architect's or Landscape's Architect's Stamp
Section 8-06-01-02 - Design of stamp

Universal Citation: ND Admin Code ยง 8-06-01-02

Current through Supplement No. 394, October, 2024

1. Each licensed architect's or landscape architect's stamp shall be no less than one and one-half inches and no more than two inches in diameter. It shall contain the name of the licensed architect or landscape architect; the individual's license number, the word "DATE: / / and the words "LICENSED ARCHITECT - STATE OF NORTH DAKOTA" or "LICENSED LANDSCAPE ARCHITECT - STATE OF NORTH DAKOTA" as appropriate. This stamp shall be as per the format below:

Click here to view image.

The stamp designed and adopted by the board in the rules and regulations dated __________, as it appears below, will be accepted for persons licensed prior to the effective date of those rules.

Click here to view image.

2. The format of the stamp may be a rubber stamp, an embosser, or a digital image.

3. Each licensee is responsible for procuring the licensee's own stamp.

General Authority: NDCC 43-03-08

Law Implemented: NDCC 43-03-22

Disclaimer: These regulations may not be the most recent version. North Dakota may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.