North Dakota Administrative Code
Title 37 - Department of Transportation
Article 37-07 - Maintenance Road Signs
Chapter 37-07-01 - Specifications and Installation of Minimum Maintenance Road Signs
Section 37-07-01-02 - Minimum maintenance road signs - Material

Current through Supplement No. 394, October, 2024

Material used for the fabrication of minimum maintenance road signs must be in accordance with the Manual on Uniform Traffic Control Devices adopted by the state highway commissioner under North Dakota Century Code section 39-13-06. The signs must be fabricated using silver-white TYPE III A retroreflective sheeting, as defined in the current edition of the state highway department Standard Specifications for Road and Bridge Construction, where required by section 37-07-01-04, and the sign panel must be constructed of .080 gauge aluminum. The signs may be installed on either steel or wood posts of appropriate size and strength for the support of the sign panel.

General Authority: NDCC 24-07-36

Law Implemented: NDCC 24-07-36

Disclaimer: These regulations may not be the most recent version. North Dakota may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.