North Dakota Administrative Code
Title 33.1 - Department of Environmental Quality
Article 33.1-24 - Hazardous Waste Management
Chapter 33.1-24-02 - IDENTIFICATION AND LISTING OF HAZARDOUS WASTE
Section 33.1-24-02-170 - Applicability to air emission standards for process vents

Universal Citation: ND Admin Code ยง 33.1-24-02-170
Current through Supplement No. 394, October, 2024

The requirements of sections 33.1-24-02-170 through 33.1-24-02-179 apply to process vents associated with distillation, fractionation, thin-film evaporation, solvent extraction, or air or steam stripping operations that manage hazardous secondary materials excluded under the remanufacturing exclusion at subdivision z of subsection 1 of section 33.1-24-02-04 with concentrations of at least ten parts per million weight, unless the process vents are equipped with operating air emission controls in accordance with the requirements of an applicable Clean Air Act regulation codified under 40 CFR part 60, part 61, or part 63.

General Authority: NDCC 23.1-04-03; S.L. 2017, ch. 199, § 1

Law Implemented: NDCC 23.1-04-03, 23.1-04-05; S.L. 2017, ch. 199, § 19

Disclaimer: These regulations may not be the most recent version. North Dakota may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.