North Dakota Administrative Code
Title 33.1 - Department of Environmental Quality
Article 33.1-14 - NORTH DAKOTA BOILER RULES
Chapter 33.1-14-05 - POWER BOILERS - EXISTING INSTALLATIONS
Section 33.1-14-05-12 - Operation

Current through Supplement No. 394, October, 2024

1. The operation of safety valves and safety relief valves must meet the requirements of the edition of the American Society of Mechanical Engineers Code, section 1, referenced in this article or by the requirements of the edition of the American Society of Mechanical Engineers Code, section 1, to which the boiler they are installed was constructed.

2. If the operating conditions of a valve are changed so as to require a new spring for a different pressure, the valve must be adjusted by the manufacturer, the manufacturer's authorized representative, or by a holder of a valid national board "VR" certificate who shall furnish and install a new nameplate.

General Authority: NDCC 23.1-16

Law Implemented: NDCC 23.1-16

Disclaimer: These regulations may not be the most recent version. North Dakota may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.