North Dakota Administrative Code
Title 33.1 - Department of Environmental Quality
Article 33.1-14 - NORTH DAKOTA BOILER RULES
Chapter 33.1-14-03 - GENERAL REQUIREMENTS
Section 33.1-14-03-04 - Removal of covering to permit inspection
Universal Citation: ND Admin Code ยง 33.1-14-03-04
Current through Supplement No. 394, October, 2024
If the boiler is jacketed so that the longitudinal seams of shells, drums, or domes cannot be seen, enough of the jacketing, setting wall, or other form of casing or housing must be removed, at the discretion of the inspector, so that the size of the rivets, pitch of the rivets, and other data necessary to determine the safety of the boiler may be obtained, provided such information cannot be determined by other means.
General Authority: NDCC 23.1-16
Law Implemented: NDCC 23.1-16
Disclaimer: These regulations may not be the most recent version. North Dakota may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.