North Dakota Administrative Code
Title 33.1 - Department of Environmental Quality
Article 33.1-14 - NORTH DAKOTA BOILER RULES
Chapter 33.1-14-02 - ADMINISTRATION
Section 33.1-14-02-09 - Restamping boilers

Universal Citation: ND Admin Code ยง 33.1-14-02-09
Current through Supplement No. 394, October, 2024

When the stamping on a boiler becomes indistinct, the inspector shall instruct the owner or user to have it restamped. Request for permission to restamp the boiler must be made to the chief inspector and proof of the original stamping must accompany the request before authorization by the chief inspector. Restamping authorized by the chief inspector may be done only by an inspector, and must be identical with the original stamping, except that it is not required to restamp the American Society of Mechanical Engineers Code symbol. Notice of completion of such restamping must be filed with the chief inspector by the inspector who stamped the boiler or pressure vessel, together with a facsimile of the stamping.

General Authority: NDCC 23.1-16

Law Implemented: NDCC 23.1-16

Disclaimer: These regulations may not be the most recent version. North Dakota may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.