North Carolina Administrative Code
Title 21 - OCCUPATIONAL LICENSING BOARDS AND COMMISSIONS
Chapter 50 - PLUMBING, HEATING AND FIRE SPRINKLER CONTRACTORS
Section .0400 - GENERAL PROCEDURES
Section 50 .0408 - CHANGE OF TRADE NAME

Universal Citation: 21 NC Admin Code 50 .0408

Current through Register Vol. 38, No. 18, March 15, 2024

(a) The trade name under which a license is issued may be changed upon written request to and compliance with Paragraph (b) of this Rule. If the Board approves the name change, the last license issued to the licensee must be returned to the Board before the new license will be sent to the licensee.

(b) A contractor license shall be issued or renewed using any corporate name, partnership name, State or local governmental agency, private educational institution, or trade name which is not the same as a name already in use according to the records of the Board.

(c) The licensee shall notify the Board of any change in location, telephone number, physical address, or mailing address from that shown on the last license renewal invoice within 30 days after the change takes place.

Authority G.S. 55B-5; 87-18; 87-26;
Eff. February 1, 1976;
Readopted Eff. September 29, 1977;
Amended Eff. January 1, 2010; December 1, 2003; November 1, 1994; February 1, 1991; May 1, 1989;
Pursuant to G.S. 150B-21.3A, rule is necessary without substantive public interest Eff. August 22, 2015;
Amended Eff. July 1, 2020.

Disclaimer: These regulations may not be the most recent version. North Carolina may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.