North Carolina Administrative Code
Title 21 - OCCUPATIONAL LICENSING BOARDS AND COMMISSIONS
Chapter 29 - LOCKSMITH LICENSING BOARD
Section .0800 - CONTINUING EDUCATION
Section 29 .0802 - REQUIREMENTS

Universal Citation: 21 NC Admin Code 29 .0802

Current through Register Vol. 38, No. 18, March 15, 2024

(a) Every licensee shall obtain 16 contact hours of continuing education during each 3-year renewal cycle, except:

(1) Persons exempted from eight contact hours in Rule .0805 of this Section; and

(2) Persons who:
(A) are at least 62 years of age;

(B) have at least 15 years of experience as locksmiths;

(C) have been North Carolina licensed locksmiths for at least nine years; and

(D) are not subject to an investigation by the Board.

(b) The contact hours of continuing education shall be in technical and professional subjects related to the practice of locksmithing.

(c) Licensees shall not carry forward any contact hours of continuing education into the subsequent renewal period.

(d) Licensees shall verify completion of the contact hours of continuing education for the previous license period on their application for license renewal.

Authority G.S. 74F-6;
Eff. February 1, 2005;
Amended Eff. April 1, 2012;
Readopted Eff. June 1, 2017;
Amended Eff. January 1, 2019.

Disclaimer: These regulations may not be the most recent version. North Carolina may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.