North Carolina Administrative Code
Title 15A - Environmental Quality
Chapter 18 - ENVIRONMENTAL HEALTH
Subchapter C - WATER SUPPLIES
Section .1500 - WATER QUALITY STANDARDS
Section 18C .1507 - CORROSION CONTROL AND LEAD AND COPPER MONITORING

Universal Citation: 15A NC Admin Code 18C .1507

Current through Register Vol. 39, No. 6, September 16, 2024

(a) Control and adjustment of pH shall be provided for community water systems having water with a pH below 6.5. This control and adjustment shall be approved by the Department pursuant to the rules in Section .0300 of this Subchapter. If the community water system is also required to install corrosion control treatment to comply with (c) of this Rule, it shall meet the minimum pH level required pursuant to Paragraph (c) of this Rule.

(b) The provisions of 40 C.F.R. 141.42 are incorporated by reference, including subsequent amendments and editions. Copies may be obtained as set forth in Rule .0102(b) of this Subchapter.

(c) The provisions of 40 C.F.R. 141, Subpart I - Control of Lead and Copper are incorporated by reference, including subsequent amendments and editions. Copies may be obtained as set forth in Rule .0102(b) of this Subchapter.

Authority G.S. 130A-315; P.L. 93-523; 40 C.F.R. 141;
Eff. September 1, 1979;
Amended Eff. October 1, 1982; February 27, 1982;
Transferred and Recodified from 10 NCAC 10D .1621 Eff. April 4, 1990;
Amended Eff. April 1, 2014; July 1, 1994; October 1, 1992; December 1, 1991;
Readopted Eff. July 1, 2019.

Disclaimer: These regulations may not be the most recent version. North Carolina may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.