North Carolina Administrative Code
Title 15A - Environmental Quality
Chapter 18 - ENVIRONMENTAL HEALTH
Subchapter C - WATER SUPPLIES
Section .0300 - SUBMISSION OF PLANS: SPECIFICATIONS: AND REPORTS
Section 18C .0306 - CHANGES IN ENGINEERING PLANS OR SPECIFICATIONS AFTER APPROVAL

Universal Citation: 15A NC Admin Code 18C .0306
Current through Register Vol. 39, No. 12, December 1, 2024

Deviations from the approved engineering plans and specifications or changes in site conditions affecting capacity, hydraulic conditions, operating units, the functioning of water treatment processes, the quality of water to be delivered, or any provisos stipulated in the Department's original and subsequent letters of approval must be approved by the Department before any construction or installation. Revised engineering plans and specifications shall be submitted in time to permit the review and approval of such plans or specifications before any construction work affected by such deviations is begun. The Secretary may seek injunctive relief under G.S. 130A-18, assess an administrative penalty under G.S. 130A-22(b), or revoke or suspend engineering plan approval under G.S. 130A-23 for any violation of this Rule.

Authority G.S. 130A-315; 130A-317; P.L. 93-523;
Eff. January 1, 1977;
Readopted Eff. December 5, 1977;
Amended Eff. November 1, 1987;
Temporary Amendment Eff. October 1, 1999;
Amended Eff. August 1, 2000;
Pursuant to G.S. 150B-21.3A, rule is necessary without substantive public interest Eff. November 23, 2015.

Disclaimer: These regulations may not be the most recent version. North Carolina may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.