North Carolina Administrative Code
Title 15A - Environmental Quality
Chapter 13 - SOLID WASTE MANAGEMENT
Subchapter B - SOLID WASTE MANAGEMENT
Section .1600 - REQUIREMENTS FOR MUNICIPAL SOLID WASTE LANDFILL FACILITIES (MSWLFS)
Section 13B .1620 - ENGINEERING PLAN
Current through Register Vol. 38, No. 18, March 15, 2024
(a) Purpose. The engineering plan that is required to be submitted in accordance with Rule .1617 of this Section shall incorporate the detailed plans and specifications relative to the design and performance of the MSWLF's containment and environmental control systems. The engineering plan shall set forth the design parameters and construction requirements for the components of the MSWLF's systems, shall meet the requirements of this Rule, and shall establish the responsibilities of the design engineer. The engineered components shall be described in Rule .1624 of this Section.
(b) Responsibilities of the design engineer. The engineering plan shall be prepared by a licensed professional engineer if required by G.S. 89C. The design engineer shall incorporate a statement certifying this fact and bearing his or her seal of registration.
(c) Scope. An engineering plan shall be prepared for the proposed area of development that provides no less than five years of operating capacity and no more than the total facility capacity, consistent with the development phases and design criteria defined in the facility plan. The engineering plan shall incorporate the design of leachate management and other environmental control facilities. The engineering plan shall contain a report and a set of drawings that represent the engineering design in accordance with Paragraphs (d) and (e) of this Rule.
(d) An engineering report shall contain:
(e) Engineering drawings shall illustrate:
Authority
G.S,
130A-294;
Eff. October 9,
1993;
Readopted Eff. September 16,
2021.