North Carolina Administrative Code
Title 15A - Environmental Quality
Chapter 02 - ENVIRONMENTAL MANAGEMENT
Subchapter Q - AIR QUALITY PERMITS PROCEDURES
Section .0500 - TITLE V PROCEDURES
Section 02Q .0528 - 112(G) CASE-BY-CASE MACT PROCEDURES
Current through Register Vol. 39, No. 6, September 16, 2024
(a) Applicability. An owner or operator of a source required to apply maximum achievable control technology (MACT) pursuant to 15A NCAC 02D .1112 shall follow the permit procedures set out in this Rule.
(b) Construction prohibition. A person shall not begin construction or reconstruction of a major source of hazardous air pollutants unless:
(c) Requirements for constructed and reconstructed major sources. If a case-by-case determination of MACT is required by 15A NCAC 02D .1112, the owner or operator shall submit a permit application to the Division and the Division shall process the application following the procedures of 15A NCAC 02Q .0501(c).
(d) Alternative operating scenarios. When applying for a permit, the owner or operator may request approval of case-by-case MACT determinations for alternative operating scenarios. Approval of such determinations shall satisfy the requirements of Section 112(g) of the federal Clean Air Act for each such scenario.
(e) Application requirements for a case-by-case MACT determination. The owner or operator of a source required to apply MACT pursuant to 15A NCAC 02D .1112 shall submit a permit application that contains all the information required by 40 CFR 63.43(e).
(f) Reporting to the EPA. Within 60 days of the issuance of a permit pursuant to this Section or 15A NCAC 02Q .0300 that incorporates a MACT determination, the Director shall provide a copy of the permit to the EPA and shall provide a summary in electronic format for inclusion in the MACT database.
Authority
G.S.
143-215.3(a)(1);
143-215.107(a)(5),(10);
Eff. July 1, 1998;
Readopted Eff. April 1,
2018.