North Carolina Administrative Code
Title 15A - Environmental Quality
Chapter 02 - ENVIRONMENTAL MANAGEMENT
Subchapter Q - AIR QUALITY PERMITS PROCEDURES
Section .0300 - CONSTRUCTION AND OPERATION PERMITS
Section 02Q .0310 - PERMITTING OF NUMEROUS SIMILAR FACILITIES

Universal Citation: 15A NC Admin Code 02Q .0310

Current through Register Vol. 39, No. 6, September 16, 2024

(a) The Director shall not issue a single permit for more than one facility pursuant to this Rule unless:

(1) there is no difference between the facilities that would require special permit conditions for any individual facility; and

(2) no unique analysis is required for any facility covered by the permit.

(b) A permit issued pursuant to this Rule shall identify criteria by which facilities or sources qualify for the permit. The Director shall grant the terms and conditions of the permit to facilities or sources that qualify.

(c) The facility or source shall be subject to enforcement action for operating without a permit if the facility or source is later determined not to qualify for the the permit issued pursuant to this Rule.

(d) The owner or operator of a facility or source that qualifies for a permit issued pursuant to this Rule shall apply for coverage by the terms of the permit issued pursuant to this Rule or shall apply for a standard permit for each facility or source pursuant to this Section.

Authority G.S. 143-215.3(a)(1); 143-215.108;
Temporary Adoption Eff. March 8, 1994 for a period of 180 days or until the permanent rule becomes effective, whichever is sooner;
Eff. July 1, 1994;
Readopted Eff. April 1, 2018.

Disclaimer: These regulations may not be the most recent version. North Carolina may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.