North Carolina Administrative Code
Title 15A - Environmental Quality
Chapter 02 - ENVIRONMENTAL MANAGEMENT
Subchapter K - DAM SAFETY
Section .0200 - OBTAINING APPROVAL FOR DAM CONSTRUCTION: REPAIR:OR REMOVAL
Section 02K .0212 - ADDITIONAL DESIGN REQUIREMENTS

Universal Citation: 15A NC Admin Code 02K .0212

Current through Register Vol. 39, No. 6, September 16, 2024

(a) All elements of the dam and reservoir shall conform to generally accepted engineering standards. The safety factors, design standards, and design references that are used shall be included with the final design report and the plans and specifications as set forth in Rule .0201 of this Section.

(b) Monitoring or inspection devices may be required by the Director for use by inspectors or owners in the inspection during construction and filling and after completion of construction if the Director determines that these measures are needed to carry out the purposes of the Dam Safety Law of 1967. The Director shall also require that monitoring or inspection devices be observed and the information recorded and made available to the Department.

(c) The plans, construction schedule, and construction specification shall also contain the elements necessary to achieve the conditions specified in G.S. 143-215.31(b).

Authority G.S. 143-215.26; 143-215.27; 143-215.31;
Eff. June 15, 1980;
Readopted Eff. December 1, 2018.

Disclaimer: These regulations may not be the most recent version. North Carolina may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.